Abstract:The gas hydrates in the pore space constitutionally affect the mechanical properties of gas hydrate-bearing sediments. The hydrates contribute to the mechanical properties of hydrate-bearing sediments by densifying, bearing and bonding effects. A discrete element model of hydrate-bearing silt was established by randomly filling hydrate particles into a silt-sized granular skeleton reservoir. Three ideal types of hydrate-bearing silt, namely, distributed particulate hydrate-bearing silt (type I), cluster hydrate-bearing silt (type II) and cemented cluster hydrate-bearing silt (type III) are proposed to study the mechanical effects of hydrate. One-dimensional loading (oedometer test) was applied to the numerical sample to investigate its stress evolution, volume change, bond degradation, coordination condition and stress transmission. The main conclusions are as follows. Type III sample exhibits a convex stress path due to bonding and then the stress path gradually returns to the pseudo linear stress path of type I sample due to bond breakage. The compression curve for the type II or type III sample exhibits a structural yield stress, which corresponds to abrupt bond breakage; the compression curves for types I, II and III evolve to be approximately coincident with each other at the end of compression. The average coordination number Z in type II or type III is approximately constant before widespread bond breakage, and then it will evolve to the curve of type I; the inflexion stress of the coordination numbers corresponds to the structural yield stress. The greatest magnitude of the mean stress bearing by hydrates in type II or type III sample is near the structural yield stress; the mean stresses ps - hb$$p_{{\text{s - h}}}^{{\text{b}}}$$ and ph - hb$$p_{{\text{h - h}}}^{{\text{b}}}$$ (created by bonded silt-hydrate and hydrate-hydrate contacts, respectively) in type III sample first increase under compression and then decrease due to widespread bond breakage, and they are exceeded by ps - hu$$p_{{\text{s - h}}}^{{\text{u}}}$$ and ph - hu$$p_{{\text{h - h}}}^{{\text{u}}}$$ (created by unbonded silt-hydrate and hydrate-hydrate contacts, respectively) after reaching the structural yield stress.

Experimental Study of Uniaxial Compressive Strength of Gas Hydrate-Bearing Sediment at Constant Strain Rate

Experimental Study on Mechanical Properties of Gas Hydrate-Bearing Sediments Using Kaolin Clay

Formation Kinetics and Morphology Characteristics of Fracture-Filling Natural Gas Hydrate under the Influence of Multiple Parameters

Empirical evaluation of the strength and deformation characteristics of natural and synthetic gas hydrate-bearing sediments with different ranges of porosity, hydrate saturation, effective stress, and strain rate

Mechanical Behavior of Hydrate-Bearing Clayey-Silty Sediments in the South China Sea: Strain-Rate Dependency

Study on Shear Strength of Artificial Methane Hydrate

Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

Experimental Study on the Evolution of Compressibility and Gas Permeability of Sediments after Hydrate Decomposition under Effective Stress

Role of Mechanical Deformation in the Thermal Transport of Si-Type Methane Hydrate.

A Study on the Differences of Mechanical Properties between CH<sub>4</sub> and CO<sub>2</sub> Hydrate-Bearing Sediments

Experimental Measurements of Mechanical Properties of Carbon Dioxide Hydrate-Bearing Sediments

Undrained triaxial tests on water-saturated methane hydrate–bearing clayey-silty sediments of the South China Sea

Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

Effect of clay type and content on the mechanical properties of clayey silt hydrate sediments

Estimating Mechanical Parameters of Hydrate-Bearing Sediments on Basis of Shear Wave Velocity Under Triaxial Compression

Experimental Investigation on Methane Hydrate-Bearing Sediment Permeability under a Wide Range of Conditions

Effect of Sediment Stratification on the Mechanical and Acoustic Properties of Hydrate-Bearing Sediments

Influence of hydrate participation on the mechanical behaviour of fine-grained sediments under one-dimensional compression: a DEM study

Numerical Investigation of the Deformation Characteristics of Hydrate-Bearing Sediments During Hydrate Extraction

Mechanical Behaviours of Gas-Hydrate-bearing Clayey Sediments of the South China Sea