Abstract:In this article, the circuit parameters (stage capacitance, duty cycle, and voltage droop) of a generic resistive‐loaded solid‐state Marx generator (SSMG) that produces a single/burst of pulses are precisely modeled. A closed‐form analytic design algorithm is proposed to provide an in‐depth vision of the individual effect of the SSMG's design parameters on the circuit performance. Summary Solid‐state Marx generators (SSMGs) are capable of generating high‐voltage pulses, with certain repetition frequency, and have a multitude of applications. Published research work targets more elaborate SSMG circuits without the existence of a specific design procedure. In this paper, basic circuit parameters (stage capacitance, duty cycle and voltage droop) of generic resistive‐loaded SSMG—producing a single/burst of pulses—are precisely modeled. Accordingly, a generalized, closed‐form analytic design algorithm suitable for any resistive‐loaded SSMG is presented; the proposed algorithm guides designers throughout the SSMG design phase and furthermore, produces parametric design curves that provide designers with an in‐depth vision of the individual effect of each design parameter on the circuit performance. To quantify the robustness of the proposed algorithm, it is used to design a simple conventional, load‐dependent SSMG architecture fulfilling specific application requirements (frequency of 10 KHz, peak output voltage of 1.2 KV, and 510‐W average power per burst). Based on the obtained design and using the derived equations, the average power per burst is calculated for different number of pulses in the range of 1–10 pulses for the simulation and the implementation. The resulting relative error between the simulation and the measurement results is found to be in the range of 0.14%–0.37%. Afterward, the proposed algorithm is used to validate the published results of a complex SSMG. The relative error between the published results and those obtained using the proposed algorithm does not exceed 2.5%; this validates the modeling behind the proposed design technique and renders it as a solution approach for any resistive‐loaded SSMG topology irrespective of its complexity.

Analysis on Stray Parameters in A Solid-State Marx Pulsed Power Modulator

Stray Parameters in a Novel Solid State Pulsed Power Modulator

Investigation on a Novel Multiple-Switch Pulsed Power Technology

All Solid-State Marx Modulator with Bipolar High-Voltage Fast Narrow Pulses Output

High-voltage pulse waveform modulator based on solid-state Marx generator

All Solid-State Pulsed Power Generator with Semiconductor and Magnetic Compression Switches

A Flexible Solid-State Marx Modulator Module Based on Discrete Magnetic Coupling Drivers

A Repetitive High Voltage Pulse Adder Based on Solid State Switches

All-Solid-State Repetitive Pulsed-Power Generator Using IGBT and Magnetic Compression Switches

An All Solid-State Pulsed Power Generator Based on Marx Generator

All Solid-State Nanosecond Pulsed Generators Based on Marx and Magnetic Switches

Repetitive High-Voltage Pulse Modulator Using Bipolar Marx Generator Combined with Pulse Transformer

Analysis and Design of Pulse Frequency Modulation Dielectric Barrier Discharge for Low Power Applications

Solid-state Marx based two-switch voltage modulator for the On-Line Isotope Mass Separator accelerator at the European Organization for Nuclear Research

Review on Solid-State-Based Marx Generators

Soft Switching Circuit to Improve Efficiency of All Solid-State Marx Modulator for DBDs

Experimental research on MHz repetition rate solid-state modulator

A generalized closed‐form analytic design technique for solid‐state Marx generators

The Development of Solid-state Pulse Generator Based on Marx Circuit with Chopping Switch

Parameterized Nanosecond Pulse Realization Through Parametrical Modulation of Timing Sequence of Switches in Marx Circuit

Design, Implementation And Analysis Of Solid-State Megahertz Continuous High-Repetition-Frequency High-Voltage Pulse Source