Abstract:In order to solve the problem of poor heat storage capacity of traditional thermal insulation materials, the author proposed a building thermal simulation study of PCM wall under smart home buildings. The author chose urea-formaldehyde resin microcapsule with 60% mass fraction of paraffin as the research object, and gave the structure of the study wall. After determining the physical parameters of PCM, the phase change wall is simulated and analyzed, and the simulation results are compared with the experimental results used to verify the accuracy of the model. The internal temperature of phase change wall and reference wall, and the internal and external wall temperature of four-way wall were compared and analyzed by using the simulation results. The results show that the internal wall temperature of the reference wall in four directions increased with time after the 54th hour, reached the peak temperature at the 65th hour, and then the internal wall temperature decreased with time, however, the internal wall temperature in four directions began to rise with time after the 56th hour of phase transition wall, and decreased with time after the 70th hour, this indicates that there is always hysteresis of temperature rise/fall in the inner wall of PCM wall, indicating the thermal inertness of PCM heat transfer. The changes of exterior wall temperature are similar to that of exte?rior wall temperature. With the increase/decrease of outdoor temperature, exterior wall temperature increases/decreases. However, the PCM exterior wall temperature curve is higher than the reference wall (ordinary gypsum layer) inside the wall temperature curve, indicating that the PCM exterior wall temperature is higher than the reference wall exterior wall temperature. The heat transfer between inside and outside walls of building is consistent with the outdoor temperature, but the heat transfer speed of phase change wall is slow due to the heat storage function, which proves that PCM in the structure is thermal inert and capable of heat stor?age.

Dynamic heat transfer of brick wall filled with phase change materials (PCM) under fluctuating temperatures

Thermal behavior analysis of hollow bricks filled with phase-change material (PCM)

Numerical simulation and thermal performance of hybrid brick walls embedding a phase change material for passive building applications

Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard

Experimental study of breathable and heterogeneous phase change material (B&H-PCM) wall for all-season thermal performance enhancement

Moisture transfer characteristics of the wall with phase change material

Parametric Analysis of the Phase Change Material Wall Combining with Micro-Channel Heat Pipe and Sky Radiative Cooling Technology

Study on the heat transfer of a concrete wall outfitted with phase change materials

Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves

Thermal energy modelling system for green energy application of exterior wall under smart home building

Investigation on Mechanical Properties and Temperature Control Efficiency of Novel Load-Bearing and Heat-Storing Metastructure Walls in Hot Summer-Cold Winter Regions

A parametric study on the thermal response of a building wall with a phase change material (PCM) layer for passive space cooling

Simulation of phase change materials in building walls using effective heat capacity model by recent numerical methods

A parametric model on thermal evaluation of building envelopes containing phase change material

Effect of thermal parameters on heat storage and release performance of phase change material composite wall

Thermoeconomic analysis of a wall incorporating phase change material in a rural residence located in northeast China

Characteristics optimization of composite phase-change wall during intermittent heating process

Dynamic integration of phase change material in walls for enhancing building thermal performance—A novel self-adaptive method for moving PCM layer

Influence of wall thermal performance on the contribution efficiency of the Phase-Change Material (PCM) layer

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Impacts of PCM Location and Thickness on Dynamic Thermal Characteristics of External Walls for Residential Buildings