Abstract:This work evaluates the catalytic activity of gel-type and macroreticular sulfonic styrene-divinylbenzene ion-exchange resins (IERs) incorporating metallic Pd or Cu nanoparticles for the synthesis of methyl isobutyl ketone (MIBK) from acetone following a one-pot synthesis approach. The effects of reaction time, temperature, and metal loading on the catalytic activity are studied, along with reusability (batch) and stability (fixed-bed) tests, highlighting the industrial potential of the most active catalyst prepared consisting of Pd-embedded particles within a strongly acidic gel-type IER support. Pd-based catalysts are more active than Cu ones, reaching 100% selectivity to MIBK and yields to MIBK of 36%, similar to the commercial benchmark also tested for comparison, i.e. AmberlystTMCH28. The highest yield to MIBK (54%) is obtained at 120 °C, 30 bar of H 2 , 300 rpm, a catalyst load of 5 wt% and a Pd loading of 1 wt% after 24 h, with margin to improvement since the catalytic activity is found to increase with temperature up to 130 °C without detectable by-products formation. The extensive characterization by several techniques (ICP-MS, SEM–EDS, N 2 physisorption, ISEC, TEM/HRTEM, and XRD) enabled to draw crucial conclusions to understand the role of IER morphology and metal used on the catalytic activity. Sintering of both Pd and Cu nanoparticles depends on the structural type of the resin support, being magnified for macroreticular resins due to an enhanced propensity towards particle coalescence in comparison to gel-type supports. The different extent of leaching observed for the Pd- or Cu- containing IERs is explained on a basis of the behavior of the corresponding metallic nanoparticles within the resins structure. The active metallic Pd or Cu phases have been identified by HRTEM, confirming the presence of metal oxide species.

Bifunctionalized Hollow Nanospheres for the One-Pot Synthesis of Methyl Isobutyl Ketone from Acetone.

Producing methy1 isobuty1 ketone by dehydrogenation of methyl isobuty1 carbinol

One-Pot Liquid-Phase Synthesis of Methyl Isobutyl Ketone Over Bifunctional Ion-Exchange Resins: Unravelling the Role of Resins Structure and Active Pd or Cu Phases on Sintering, Leaching and Catalytic Activity

Fabrication of Pd-based Metal-Acid-alkali Multifunctional Catalysts for One-Pot Synthesis of MIBK

Synthesis of N-(1,3-dimethylbutyl)-N'-Phenyl-p-Phenylenediamine with Diphenyl-Sulfide Modified Pd/C Catalysts

Preparation of Bimetallic CuZn@mSiO2 Yolk‐Shell Catalyst for the Selective Oxidation of Cumene to Acetophenone

Multifunctional catalysis by Pd@MIL-101: one-step synthesis of methyl isobutyl ketone over palladium nanoparticles deposited on a metal-organic framework.

One-pot Encapsulation of Pt Nanoparticles into the Mesochannels of SBA-15 and their Catalytic Dehydrogenation of Methylcyclohexane

Practical Preparation of Methyl Isobutyl Ketone by Stepwise Isopropylation Reaction of Acetone

A one-pot synthesis of high-density biofuels through bifunctional mesoporous zeolite-encapsulated Pd catalysts

Alkylation of Isobutane/1-Butene on Methyl-Modified Nafion/Sba-15 Materials

Palladium nanoparticles encapsuled in MOF: An efficient dual-functional catalyst to produce benzylmalononitrile derivatives by one-pot reaction

S/CuMgAl-41 as an efficient Hybrid catalyst for asymmetric addition reaction in isopropyl alcohol solvent

Bifunctional Catalysts Ni<sub>x</sub>/Mg<sub>y</sub>Al<sub>2</sub>O<sub>y+3</sub> for Alkylation of Butanone

In-situ aqueous phase hydrodeoxygenation of methyl palmitate on Ni-Co alloy embedded in mesoporous carbon hollow spheres catalysts

Nitrogen-oxygen co-doped carbon@silica hollow spheres as encapsulated Pd nanoreactors for acetylene dialkoxycarbonylation

Porous bimetallic Pt-Fe nanocatalysts for highly efficient hydrogenation of acetone

Process Development for Methyl Isobutyl Ketone Production Using the Low-Pressure One-Step Gas-Phase Selective Hydrogenation of Acetone

In situ-synthesized Co and N-doped Mesoporous Hollow Silica Spheres for the Selective Oxidation of Ethylbenzene

Influences of the metal-acid proximity of Pd-SAPO-31 bifunctional catalysts for n-hexadecane hydroisomerization

Mesoporous Nitrogen‐Doped Carbon‐Nanosphere‐Supported Isolated Single‐Atom Pd Catalyst for Highly Efficient Semihydrogenation of Acetylene