Abstract:Mesoporous silica SEA-15 molecular sieve has been synthesized and incorporated with aluminum via three different postsynthesis procedures by reacting SEA-15 with AlCl3 in dry ethanol (route 1), with aluminum isopropaxide in dry hexane (route 2) and with an aqueous solution of sodium aluminate (route 3) followed by calcination. Characterization by transmission electron microscopy, Nz adsorption, electron probe microanalysis, powder X-ray diffraction, Al-27 magic-angle-spinning NMR, and electron spin resonance spectroscopies has been carried out to evaluate the efficiency of these alumination methods and their effect on the pore structure and ion exchange capacity of SBA-15. The Si/Al ratios in the resulting materials are in close agreement with the composition in the postsynthesis mixtures over a range of 40-10, indicating that the aluminum is mostly incorporated into silica SBA-15. The silanol groups on the internal wall surfaces of SEA-15 are suggested to be the sites for aluminum incorporation. The incorporation procedure has a strong effect on the aluminum coordination, pore structure and ion exchange capacity of the resulting materials. At comparable Si/Al ratios around 20, the percentage of aluminum with tetrahedral symmetry in the synthesized materials is about 100% (route 3) > 76% (route 1) > 71% (route 2), indicating that alumination by aqueous sodium aluminate is most effective. This is probably due to the presence of Naf ions which balance the negative charges associated with tetrahedral aluminums. The BET specific surface areas are 85% (route 1) > 60% (route 2) > 42%(route 3), showing that alumination by AlCl3 in ethanol best maintains the mesoporous structure of SBA-15. Electron-spin resonance reveals a linear dependence of the Cu(II) ion exchange capacity on the tetrahedral aluminum content of the aluminum-containing SBA-15 materials. This suggests that the incorporated aluminums in the tetrahedral framework do serve as ion exchange sites.

Alkylation of Isobutane/1-Butene on Methyl-Modified Nafion/Sba-15 Materials

Alkylation of Isobutane/1-Butene on Methyl-Modified Nafion/SBA-16 Materials

Methylation of Naphthalene with Methanol over the Al-Modified SiO2 Zeolite Catalysts

Alkylation of Isobutane/1-Butene over Periodic Mesoporous Organosilica Functionalized with Perfluoroalkylsulfonic Acid Group

Creation Of Acid Sites On Sba-15 Mesoporous Silica By Alumination

Functionalization of Sba-15 Mesoporous Silica with Thiol or Sulfonic Acid Groups under the Crystallization Conditions

Catalytic Acylation of Anisole and Benzoyl Chloride over Nafion Functionalized Mesoporous Catalysts

Mesoporous Aluminosilicate Catalysts for the Selective Isomerization of n-Hexane: The Roles of Surface Acidity and Platinum Metal.

Studies on n-butane isomerization reaction on solid oxide super acid Pt-SO4 2- /ZrO2-Al2O3 catalysts

Multiple Functionalization of Mesoporous Silica in One-Pot: Direct Synthesis of Aluminum-Containing Plugged SBA-15 from Aqueous Nitrate Solutions

A Novel Method for Incorporation of Heteroatoms into the Framework of Ordered Mesoporous Silica Materials Synthesized in Strong Acidic Media

In situ direct bifunctionalization of mesoporous silica SBA-15

Sulfonic Acid-Functionalized Mesoporous Silica: Synthesis, Characterization, and Catalytic Reaction of Alcohol Coupling to Ethers

Synthesis of FER/MFI composite zeolite using isopropylamine as a structure-directing agent

Isomerization Ofn-Butane over Deuterated Sulfated Zirconia

Alkylation of Isobutane with Butenes Using OSDA-free Zeolite Beta

New catalyst of SO2- 4/Al2O3-ZrO2 for n-butane isomerization

Alumination and Ion Exchange of Mesoporous SBA-15 Molecular Sieves

New Catalyst Of So42-/Al2o3-Zro2 For N-Butane Isomerization

Isobutane/Butene Alkylation on Supported Phosphotungstic Acid Promoted by Hexadecylphosphate

Synthesis of hydrothermally stable, hierarchically mesoporous aluminosilicate Al-SBA-1 and their catalytic properties