Abstract:The Helmholtz method is developed to predict the self-excited thermoacoustic instabilities in a gas turbine combustor, combining flame describing functions, the measured damping rates under the firing condition, and the non-uniform spatial distributions of the physical parameters. The impact of the hydrodynamic and geometrical parameters on the thermoacoustic instabilities is investigated. The measured damping rates show lower values under a hot condition compared with those in a cold state. The experimental results indicate that the relative errors of the predicted eigenfrequencies and the velocity fluctuation levels are below 10%. The pressure amplitude decreases and the phase increases in the axial direction, indicating a typical 1/4-wavelengh mode. At a higher equivalence ratio, the mode shape in the axial direction becomes steeper due to the elevated fluctuation amplitude at the pressure antinode after enhancing the thermal power. When the air flow rate increases, the discrepancies between the pressure shape on the flame tube side and that on the plenum side are reduced. The velocity fluctuation level increases as the combustor length increases at a constant damping rate. In fact, the velocity fluctuation level first increases and then declines, caused by more significant damping rates when employing longer flame tubes. Self-excited thermoacoustic instabilities can be well predicted using the proposed method.

Heat Transfer in Helmholtz-Type Valveless Self-Excited Pulse Combustor Tailpipe

Heat Transfer in Valveless Helmholtz Pulse Combustor Straight and Elbow Tailpipes

Characteristics of the Pulsating Flow and Heat Transfer in an Elbow Tailpipe of a Self-Excited Helmholtz Pulse Combustor

Pressure Characteristics of Helmholtz-type Valveless Self-excited Pulse Combustor with Bend Tail Tube

Observation of Heat Transfer in Oscillating Flow Within A Circular Channel

Frequency and Pressure Characteristics of A Helmholtz-Type Valveless Self-Excited Pulse Combustor

Characteristics of the Pulsatile Flow in a Self-excited Pulse Combustor Tailpipe

Experimental Research on Operational Characteristics of a Helmholtz-Type Valveless Self-Excited Pulse Combustor

NOx emission characteristics of a Helmholtz valveless self﹣excited pulse combustor with bend tailpipe

Heat Transfer in Reciprocating Planar Curved Tube with Piston Cooling Application

Numerical Simulation of Turbulent Pulsating Flow and Heat Transfer in Tubes

Oscillatory Heat Transfer in a Pipe Subjected to a Laminar Reciprocating Flow

Influence of Compression-Expansion Effect on Oscillating-Flow Heat Transfer in A Finned Heat Exchanger

Influence of pressure variation in decoupling chamber on heat transfer in tailpipe of self-excited pulse combustor

Simulation on Operational Characteristics of A Valveless Self-Excited Pulse Combustor of the Helmholtz-Type

Heat transfer of laminar oscillating flow in finned heat exchanger of pulse tube refrigerator

Modeling of a self-excited pulse combustor and stability analysis

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Pressure Drop and Heat Transfer Characteristics of Turbulent Flow in Annular Tubes with Internal Wave-Like Longitudinal Fins

Analysis of Thermoacoustic Instabilities Using the Helmholtz Method in a Swirled Premixed Combustor