Abstract:In order to study the characteristics of fire smoke spread and temperature distribution of a large indoor pedestrian street under different heat release rates and smoke exhaust modes, this paper focuses on the analysis of fire smoke spread, visibility, smoke temperature distribution and variation curves in an atrium. This paper uses a numerical simulation method to conduct research. PyroSim fire simulation software is used to calculate this project, which is based on a full-scale experimental design scheme. The numerical simulation results show that under the conditions of higher heat release rate, the smoke spread rate is greater than that under the conditions of lower heat release rate. Furthermore, the average temperature of smoke in the atrium is also greater, up to about 400 °C. The conditions of a higher heat release rate also show the characteristics of faster generation, faster spread and a larger volume of smoke. When the smoke exhaust system is turned on, the thickness of the smoke layer and the smoke temperature decrease. There then comes a situation where the stabile section of the fire ends in advance. The simulation results of vertical temperature distribution in an atrium can fit the modified McCaffrey plume model in any case. Under all cases, the smoke temperature reaches the maximum directly above the fire source. The horizontal dimensionless smoke temperature rises under the atrium roof, and decreases exponentially with the dimensionless distance from the fire source. The greater the heat release rate of fire source is, the smaller the attenuation coefficient is, with a more than 50% change. When the smoke exhaust system is turned on, the smoke flow accelerates and the smoke is cooled rapidly. Thus, the attenuation coefficient increases. Additionally, the effect of mechanical smoke exhaust is better than natural smoke exhaust, because mechanical smoke exhaust makes air flow and heat exchange more intense. The variation amplitudes of the attenuation coefficient under natural smoke exhaust and mechanical smoke exhaust are 13% and 22%, respectively.

Numerical investigation on the hazard of heat and smoke in a store fire

Apply numerical simulation method to chemical industry fire investigation

Evaluation of Thermal Safety in Fire Using Human Thermal Model and CFD Simulation

Numerical investigation on the effects of human movements on smoke propagation in building fire

Assessment of Human Safety and Thermal Comfort in High-Temperature Environment: Cfd and Human Thermoregulation Model

Numerical Simulation of the Fire Smoke Flow in the Corridor of a Building

Computational Simulation of Smoke Temperature Diffusion in High-rise Buildings Fires

Numerical Simulation on Smoke Temperature Distribution in a Large Indoor Pedestrian Street Fire

Numerical Simulation for Special-typed Big Fires

Numerical Study on the Fire Development Process of Typical Power Plant Multi-Floor Compartment

Investigation on Smoke Flow in Stairwells Induced by an Adjacent Compartment Fire in High Rise Buildings

Experimental and Numerical Investigations on Fire Development in a Timber-Based Compartment with Identification of Characteristic Events

Human Thermoregulation and Injury Evaluation in Fire Environments: A Review

Numerical investigations on combustion characteristics of full-size cabin fire with typical material pyrolysis and burnout under different fire source positions

Experimental Study and Numerical Analysis on the Smoke Toxicity Transportation Within Typical Building

Numerical Investigation on Smoke Movement in a Large Space Building under Fire Scenarios

Study On Simulation Of The Building Fires Using An Advanced New Model

Numerical Investigation of External Wind Effect on Smoke Characteristics in a Stairwell

Numerical Study on Smoke Temperature Characteristics in T-shaped Bifurcated Tunnel Fires

Numerical Simulation of Smoke Movement of Subway Fire under the Effect of Piston Wind

Experimental and Numerical Study on Fire Smoke Propagation and Ventilation Modes in Powerhouse of Hydropower Station During Construction Stage