Abstract:Purpose The purpose of this paper is to study the heat transfer effect of copper sensor and skin simulant on skin. Design/methodology/approach For the sensor, the physical and mathematical models of the thermal sensors were used to obtain the definite conditions in the heat transfer process of the sensor, and the heat transfer models of the two sensors were developed and solved respectively by using ANSYS WORKBENCH 19.0 software. The simulation results were compared with the experimental test results. For the skin, the numerical model of the skin model was developed and calculated. Finally, the heat transfer simulation performance of the two sensors was analyzed. Findings It is concluded that the copper sensor is more stable than the skin simulant, but the material and structure of the skin simulant is more suitable for skin simulation. The skin simulant better simulates the skin heat transfer. For all the factors in the model, the thermal properties of the material and the heat flux level are the key factors. The convective heat transfer coefficient, radiation heat transfer rate and the initial temperature have little influence on the results, which can be ignored. Research limitations/implications The results show that there are still some differences between the experimental and numerical simulation values of the skin simulant. In the future, the thermal parameters of skin simulant and the influence of the thermocouple adhesion should be further examined during the calibration process. Practical implications The results suggest that the skin simulant needs to be further calibrated, especially for the thermal properties. The copper sensor on the flame manikin can be replaced by the skin simulant with higher accuracy, which will be helpful to improve the accuracy of performance evaluation of thermal protective clothing. Social implications The application of computational fluid dynamics (CFD) technology can help to analyze the heat transfer simulation mechanism of thermal sensor, explore the influence of thermal performance of thermal sensor on skin simulation, provide basis for the development of thermal sensor and improve the application system of thermal sensor. Based on the current research status, this paper studies the internal heat transfer of the sensor through the numerical modeling of the copper sensor and skin simulant, so as to analyze the effect of the sensor simulating skin and the reasons for the difference. Originality/value In this paper, the sensor itself is numerically modeled and the heat transfer inside the sensor is studied.

Assessment of Human Safety and Thermal Comfort in High-Temperature Environment: Cfd and Human Thermoregulation Model

Evaluation of Thermal Safety in Fire Using Human Thermal Model and CFD Simulation

Modelling Heat Transfer and Physiological Responses of Unclothed Human Body in Hot Environment by Coupling CFD Simulation with Thermal Model

Human thermal models and their application in fire safety research

Human Thermoregulation and Injury Evaluation in Fire Environments: A Review

Experimental and Numerical Study of Physiological Responses in Hot Environments.

A Multi-Segmented Human Bioheat Model for Asymmetric High Temperature Environments

Review on Modeling Heat Transfer and Thermoregulatory Responses in Human Body

Numerical simulation of cooling effect of human-PCM-clothing model in hot environments

Effectiveness of Using a Thermal Sweating Manikin Coupled with a Thermoregulation Model to Predict Human Physiological Response to Different Firefighter Turnout Suits

Coupling of a Thermal Sweating Manikin and a Thermal Model for Simulating Human Thermal Response

Development and application of numerical model of thermal sensors for thermal protective clothing evaluation based on CFD simulation

Improvement and validation of the Tanabe model to simulate human thermal behaviors in hot environments at high altitudes

A coupling system to predict the core and skin temperatures of human wearing protective clothing in hot environments

Evaluation of the convective heat transfer coefficient of human body and its effect on the human thermoregulation predictions

An extended multi-segmented human bioheat model for high temperature environments

Numerical Study On The Characteristics Of Heat Release From Human Body

Human thermoregulatory model for simulating thermal response in high-temperature and hypobaric environments

An integrated thermophysiological model for predicting thermal response of medical staff wearing medical protective clothing in summer

Does detailed hygrothermal transport analysis in respiratory tract affect skin surface temperature distributions by thermoregulation model?

One-Dimensional Thermal Analysis of the Flexible Electronic Devices Integrated with Human Skin.