Abstract:Under the action of the fluctuating wind load, the low frequency part produces background response to the structures, while the high frequency part produces resonance response to the structures. In structural design, equivalent static wind load is usually used to equate the fluctuating wind load. Although there are various methods of evaluating the equivalent static wind load, they did not consider the correlation between modal responses or considered them insufficiently. Therefore, in this paper, the correlation between modal response is considered to evaluate the equivalent static wind load, the displacement response is decomposed by proper orthogonal decomposition (POD) method, the correlation between modal displacement is removed, the equivalent static wind load is expressed in the form of displacement mode, and then the correlation between modal response is fully considered in the extreme value combination. This paper combines the equivalent static wind loads in order to make the wind resistance design more reasonable for high‐rise buildings. First, the formulas of equivalent static wind loads expressed by displacement modes of background and resonant response are deduced based on modal decomposition and POD method. Second, the combination formulas of square‐root‐of‐sum‐square (SRSS) and complete‐quadratic‐combination (CQC) rules for the equivalent static wind loads considering the mean wind loads are proposed. Both the linear combination formula of SRSS for the equivalent static wind load and the weighting factor expressions of background and resonance equivalent static wind load are given. Third, the accuracy and validity of the formulas of equivalent static wind load are verified by a wind tunnel pressure test of a high‐rise building. Finally, the simplified combination coefficient formulas for the equivalent static wind loads are proposed, and the combination of the high‐rise building base's fluctuating equivalent static wind loads of along‐wind direction, across‐wind direction, and torsional direction is analyzed.

A New Methodology for Analysis of Equivalent Static Wind Loads on Super-Large Cooling Towers

Wind Effects on Rough-Walled and Smooth-Walled Large Cooling Towers

A Comprehensive High Reynolds Number Effects Simulation Method for Wind Pressures on Cooling Tower Models

Wind-induced Stochastic Response of Controlled Tall Buildings by Complex-Mode Analysis

Along-Wind Response And Equivalent Static Wind Load Of Transmission Tower

Multiobjective Equivalent Static Wind Loads on Complex Tall Buildings Using Non-Gaussian Peak Factors

Multi-Objective Optimization Analysis of Structural Design for Large Cooling Towers

Equivalent static wind load based on displacement mode and load combination for high‐rise buildings

Research on Equivalent Static Load of High-Rise/Towering Structures Based on Wind-Induced Responses

Calculation of Wind-Induced Responses and Equivalent Static Wind Loads of High-Rise Buildings Based on Wind Tunnel Tests

Coupled wind-induced responses and equivalent static wind loads on long-span roof structures with the consistent load–response–correlation method

Equivalent static wind loads on low-rise buildings based on full-scale pressure measurements

A SIMPLE METHOD TO CALCULATE THE EQUIVALENT STATIC WIND LOAD ON LOW-RISE BUILDINGS

A new atmospheric boundary layer wind tunnel simulation methodology for wind effects on large cooling towers considering wind environment variations

Wind-Induced Responses and Wind Loads on a Super High-Rise Building with Various Cross-Sections and High Side Ratio—A Case Study

Mode Shape Linearization and Correction in Coupled Dynamic Analysis of Wind‐excited Tall Buildings

Influence of wind pressure distribution on wind-induced responses and local stability of a cooling tower

Wind-induced Response of Large Hyperbolic Cooling Tower Considering Soil-Structure Interaction

Analysis of Wind-Induced Vibration Response of High-Rise Structure of Heat Sink Tower Based on Large Eddy Simulation

Wind-induced vibration assessment of tower cranes attached to high-rise buildings under construction

An improved Chinese load code method for the evaluation of wind‐induced base shear force on base‐isolated buildings