Abstract:Under the action of the fluctuating wind load, the low frequency part produces background response to the structures, while the high frequency part produces resonance response to the structures. In structural design, equivalent static wind load is usually used to equate the fluctuating wind load. Although there are various methods of evaluating the equivalent static wind load, they did not consider the correlation between modal responses or considered them insufficiently. Therefore, in this paper, the correlation between modal response is considered to evaluate the equivalent static wind load, the displacement response is decomposed by proper orthogonal decomposition (POD) method, the correlation between modal displacement is removed, the equivalent static wind load is expressed in the form of displacement mode, and then the correlation between modal response is fully considered in the extreme value combination. This paper combines the equivalent static wind loads in order to make the wind resistance design more reasonable for high‐rise buildings. First, the formulas of equivalent static wind loads expressed by displacement modes of background and resonant response are deduced based on modal decomposition and POD method. Second, the combination formulas of square‐root‐of‐sum‐square (SRSS) and complete‐quadratic‐combination (CQC) rules for the equivalent static wind loads considering the mean wind loads are proposed. Both the linear combination formula of SRSS for the equivalent static wind load and the weighting factor expressions of background and resonance equivalent static wind load are given. Third, the accuracy and validity of the formulas of equivalent static wind load are verified by a wind tunnel pressure test of a high‐rise building. Finally, the simplified combination coefficient formulas for the equivalent static wind loads are proposed, and the combination of the high‐rise building base's fluctuating equivalent static wind loads of along‐wind direction, across‐wind direction, and torsional direction is analyzed.

Equivalent static wind loads on low-rise buildings based on full-scale pressure measurements

Revealing Aeroelastic Effects on Low-Rise Roof Structures in Turbulent Winds Via Isogeometric Fluid–structure Interaction

Effects of plan dimensions on gust wind loads for high-rise buildings

Multiobjective Equivalent Static Wind Loads on Complex Tall Buildings Using Non-Gaussian Peak Factors

Numerical study of wind loads on low-rise gable-roofed building roofs——Analysis of roof pitch and height-width ratio effects

Equivalent static wind load based on displacement mode and load combination for high‐rise buildings

A SIMPLE METHOD TO CALCULATE THE EQUIVALENT STATIC WIND LOAD ON LOW-RISE BUILDINGS

Analysis and Practical Determination of Wind-Load Shape Factors for Low-Rise Hip Roofed Buildings

Simulation and analysis of wind pressure distribution on low-rise buildings

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Wind Tunnel Experimental Study of Wind Pressure Distribution on Tall Buildings Considering Surrounding Interference

Numerical simulation of wind pressures on low-rise hip roofed buildings

Calculation of Wind-Induced Responses and Equivalent Static Wind Loads of High-Rise Buildings Based on Wind Tunnel Tests

Three‐dimensional Wind Load Effects and Wind‐induced Dynamic Responses of a Tall Building with X‐shape

Wind-Induced Responses and Wind Loads on a Super High-Rise Building with Various Cross-Sections and High Side Ratio—A Case Study

Equivalent static wind loads on canopies of regular railway stations

Coupled wind-induced responses and equivalent static wind loads on long-span roof structures with the consistent load–response–correlation method

Wind pressures acting on low-rise buildings

An Innovative Method for Wind Load Estimation in High-Rise Buildings Based on Green's Function

Along-Wind Response And Equivalent Static Wind Load Of Transmission Tower

Directional alongwind and crosswind effects on the performance of a 15-storey steel braced frame building in seismic environment