Abstract:Under the action of the fluctuating wind load, the low frequency part produces background response to the structures, while the high frequency part produces resonance response to the structures. In structural design, equivalent static wind load is usually used to equate the fluctuating wind load. Although there are various methods of evaluating the equivalent static wind load, they did not consider the correlation between modal responses or considered them insufficiently. Therefore, in this paper, the correlation between modal response is considered to evaluate the equivalent static wind load, the displacement response is decomposed by proper orthogonal decomposition (POD) method, the correlation between modal displacement is removed, the equivalent static wind load is expressed in the form of displacement mode, and then the correlation between modal response is fully considered in the extreme value combination. This paper combines the equivalent static wind loads in order to make the wind resistance design more reasonable for high‐rise buildings. First, the formulas of equivalent static wind loads expressed by displacement modes of background and resonant response are deduced based on modal decomposition and POD method. Second, the combination formulas of square‐root‐of‐sum‐square (SRSS) and complete‐quadratic‐combination (CQC) rules for the equivalent static wind loads considering the mean wind loads are proposed. Both the linear combination formula of SRSS for the equivalent static wind load and the weighting factor expressions of background and resonance equivalent static wind load are given. Third, the accuracy and validity of the formulas of equivalent static wind load are verified by a wind tunnel pressure test of a high‐rise building. Finally, the simplified combination coefficient formulas for the equivalent static wind loads are proposed, and the combination of the high‐rise building base's fluctuating equivalent static wind loads of along‐wind direction, across‐wind direction, and torsional direction is analyzed.

Mode Shape Linearization and Correction in Coupled Dynamic Analysis of Wind‐excited Tall Buildings

Wind-induced Stochastic Response of Controlled Tall Buildings by Complex-Mode Analysis

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Practical Analysis of Wind-Induced Human Comfort Condition of Tall Buildings

Three‐dimensional Wind Load Effects and Wind‐induced Dynamic Responses of a Tall Building with X‐shape

Dynamic Wind Load Combination for a Tall Building Based on Copula Functions

Calculation of Wind-Induced Responses and Equivalent Static Wind Loads of High-Rise Buildings Based on Wind Tunnel Tests

Stochastic Optimal Control of Wind-Excited Tall Buildings Using Semi-Active Mr-Tlcds

Multiobjective Equivalent Static Wind Loads on Complex Tall Buildings Using Non-Gaussian Peak Factors

Semi-Active Control of Randomly Wind-Excited Tall Building Structures Using Mr-Tlcds

Wind-Induced Response of A Twin-Tower Structure

Integrated Structural Optimization and Vibration Control for Improving Wind-induced Dynamic Performance of Tall Buildings

Three dimensional wind-induced responses of super-tall buildings with irregular geometric shapes

Analyzing the inelastic response of wind-excited steel tall buildings through a reduced-order model incorporating strength and stiffness degradation along with P-Delta effects

Wind-Induced Dynamic Response of Inter-Story Isolated Tall Buildings with Friction Pendulum Bearing Based on an Enhanced Simplified Model

Equivalent static wind load based on displacement mode and load combination for high‐rise buildings

Model-Selection Uncertainty Quantifications in HFFB Dynamic Analyses of a Complex Tall Building

A SIMPLE METHOD TO CALCULATE THE EQUIVALENT STATIC WIND LOAD ON LOW-RISE BUILDINGS

Use of Modal Substructure Method to Improve Wind-Resistance Design of Twin Towers

Equivalent static wind loads on low-rise buildings based on full-scale pressure measurements