Abstract:In the present work, a numerical model for polymer electrolyte membrane fuel cell (PEMFC) has been employed to investigate the effects of porosity and contact angle distributions of the porous layer on the performance of PEMFC. The three-dimensional, two-phase, and non-isothermal flow solver considers heat transfer, electrochemical reaction, and liquid water saturation. Various cases with different cathode gas diffusion layer (GDL) porosities are performed. The results showed that a better performance is achieved when the GDL porosity is increased because of the reduced mass transport resistance of oxygen. The effects of the porosity distributions on the PEMFC performance were examined by comparing the predictions from the cases with non-uniform porosity and uniform porosity in the cathode GDL. It was shown that the current density of the cases with non-uniform porosity is higher than that of the uniform porosity case when the operation voltage is low. This is due to the fact that non-uniform porosity distributions in the cathode GDL enhance the reactant transport. When the operation voltage is high, the current densities of the cases with non-uniform porosity and uniform porosity are almost the same. Moreover, the influence of contact angle distributions in cathode GDL was explored. Various cases with gradient-decreasing, gradient-increasing, and uniform constant contact angles from GDL/channel interface to GDL/catalyst layer interface were studied. It was found that the case with gradient-increasing contact angle has a better performance due to the larger capillary pressure difference to remove more water. The poor performance of the case with gradient-decreasing contact angle is related to the phenomenon of flooding in the catalyst layer.

Measurements of Pore Size Distribution, Porosity, Effective Oxygen Diffusivity, and Tortuosity of Pem Fuel Cell Electrodes

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Influence of Heat Transfer on Gas and Water Transport in Fuel Cells

Insights into Oxygen Mass Transport Mechanisms in High-Temperature Proton Exchange Membrane Fuel Cells with Microelectrode

A numerical study of proton exchange membrane fuel cell performances affected by various porosities of gas difussion layer materials

Theoretical analysis of the effect of isotropy on the effective diffusion coefficient in the porous and agglomerated phase of the electrodes of a PEMFC

An Examination of the Catalyst Layer Contribution to the Disparity between the Nernst Potential and Open Circuit Potential in Proton Exchange Membrane Fuel Cells

Study on water and oxygen transfer characteristics of HT-PEM fuel cells

Effects of Cathode Gas Diffusion Layer Porosity and Contact Angle Distributions along Through-Plane Direction on the Performance of Polymer Electrolyte Membrane Fuel Cell

A novel method for effective diffusion coefficient measurement in gas diffusion media of polymer electrolyte fuel cells

Methods— A Simple Method to Measure In-Plane Electrical Resistance of PEM Fuel Cell and Electrolyzer Catalyst Layers

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Numerical Study on Oxygen Transport Pattern in Porous Transport Layer of Proton Exchange Membrane Electrolysis Cells

Porosimetry of Meas Made by "thin Film Decal" Method and Its Effect on Performance of Pefcs

Proton Transport, Electroosmotic Drag and Oxygen Permeation in Polytetrafluoroethylene Reinforced Ionomer Membranes and Their Effects on Fuel Cell Performance

Coupling effects of water content, temperature, oxygen density, and polytetrafluoroethylene loading on oxygen transport through ionomer thin film on platinum surface in catalyst layer of proton exchange membrane fuel cell

Unusual influence of binder composition and phosphoric acid leaching on oxygen mass transport in catalyst layers of high-temperature proton exchange membrane fuel cells

Experimental and Numerical Simulation Study of Oxygen Transport in Proton Exchange Membrane Fuel Cells at Intermediate Temperatures (80 °C–120 °C)

Use of Electrochemical Impedance Spectroscopy for the Evaluation of Performance of PEM Fuel Cells Based on Carbon Cloth Gas Diffusion Electrodes

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell