Abstract:Pt electrocatalyst durability in polymer electrolyte fuel cells (PEFCs) is generally evaluated through an accelerated stress test (AST); for example, one AST features repeated square-wave cycling with H 2 /N 2 between 0.6 V to 0.95 V vs. reversible hydrogen electrode (RHE) [1]. A separate triangular-wave AST with a higher potential range (1 – 1.5 V vs. RHE) assesses the durability of carbon-based supports [2]. Recent studies [3]–[5] have revealed the heterogeneous nature of cathode catalyst layer degradation. In general, Pt particle size growth mimics the flow field geometry with greater particle size growth under lands compared to channels. Additionally, growth is typically shown to be greater near the air outlet than the inlet and is assumed to be correlated to local performance decay. The impact of such localized degradation on distributed cell performance is investigated in this work. In the present study, a segmented cell is used to quantify functional dependence of local current distributions in aged samples to heterogeneous catalyst layer degradation (Pt particle size growth and carbon support corrosion). The outcome of this enhanced understanding is to identify limiting factors in cell performance at end-of-life (EOL). Single cell studies with 25-cm 2 active area are performed using catalyst-coated Nafion ® XL membranes (Ion Power Inc.) and SGL-22 BB gas diffusion layers (GDLs) as membrane electrode assembly (MEA) materials and 7-channel serpentine flow field. An S++ ® current scan shunt (CSS) sensor plate (25-cm 2 ) with 100 current and 25 temperature measurement segments is utilized for current and temperature mapping, respectively. The MEAs are subjected to DOE's square-wave cycling (0.6 to 0.95 V vs. RHE), triangular-wave cycling (1 to 1.5 V vs. RHE), and a sequence of square-wave cycling followed by triangular-wave cycling. Complete in-situ electrochemical characterization and post-mortem ex-situ diagnostics such as micro-X-ray diffraction (micro-XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are used to obtain particle size distribution and spatial degradation profiles. Results indicate a strong dependence of current distributions on localized catalyst layer degradation. For example, MEA with relatively uniform current distributions at the beginning-of-life (BOL) in Figure 1 exhibits severe mass transport limitations (significantly higher current at the air inlet than the outlet) at EOL when subjected to triangular-wave carbon corrosion AST. Furthermore, an increase of ~1.5x in Tafel slope is observed for the aged sample at EOL, highlighting increased transport losses. These mass transport losses are believed to originate from loss of catalyst layer porosity and subsequent compaction due to carbon support corrosion [2]. This work seeks to achieve a greater understanding of the functional dependence between catalyst growth and carbon corrosion and observed local performance. References: [1] S. Stariha et al., "Recent Advances in Catalyst Accelerated Stress Tests for Polymer Electrolyte Membrane Fuel Cells," J. Electrochem. Soc., vol. 165, no. 7, pp. F492–F501, 2018, doi: 10.1149/2.0881807jes. [2] N. Macauley et al., "Carbon Corrosion in PEM Fuel Cells and the Development of Accelerated Stress Tests," J. Electrochem. Soc., vol. 165, no. 6, pp. F3148–F3160, 2018, doi: 10.1149/2.0061806jes. [3] L. Cheng et al., "Mapping of Heterogeneous Catalyst Degradation in Polymer Electrolyte Fuel Cells," Adv. Energy Mater., vol. 2000623, pp. 1–7, 2020, doi: 10.1002/aenm.202000623. [4] P. Sharma et al., "Influence of Flow Rate on Catalyst Layer Degradation in Polymer Electrolyte Fuel Cells," {ECS} Meet. Abstr., vol. {MA}2020-0, no. 36, p. 2345, Nov. 2020, doi: 10.1149/ma2020-02362345mtgabs. [5] K. Khedekar et al., "Probing Heterogeneous Degradation of Catalyst in PEM Fuel Cells under Realistic Automotive Conditions with Multi-Modal Techniques," Adv. Energy Mater., 2021, doi: 10.1002/aenm.202101794. Figure 1

An Examination of the Catalyst Layer Contribution to the Disparity between the Nernst Potential and Open Circuit Potential in Proton Exchange Membrane Fuel Cells

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Experimental Analysis of Catalyst Layer Operation in a High-Temperature Proton Exchange Membrane Fuel Cell by Electrochemical Impedance Spectroscopy

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Electron Transport in PEFCs

Effect of Coupled Microstructural Characteristics of Catalyst Layer on High Temperature: Proton Exchange Membrane Fuel Cell Performance

The influences of catalyst combination on the high temperature proton exchange membrane fuel cell

Operando deconvolution of the degradation mechanisms of iron–nitrogen–carbon catalysts in proton exchange membrane fuel cells

Investigation of Proton Exchange Membrane Fuel Cell Performance by Exploring the Synergistic Effects of Reaction Parameters via Power Curve and Impedance Spectroscopy Analysis

A One-Dimensional Numerical Model of Carbon Corrosion in Catalyst Layers of Proton Exchange Membrane Fuel Cells

Unraveling the core of fuel cell performance: engineering the ionomer/catalyst interface

Modeling the Environment-Dependent Kinetics of Oxygen Reduction Reaction – Effect of Relative Humidity

Enhancing Electrode Efficiency in Proton Exchange Membrane Fuel Cells with PGM-Free Catalysts: A Mini Review

A Numerical Approach to Optimize Catalyst Layer Structure of Polymer Electrolyte Fuel Cells Using Non-Isothermal Three-Dimensional Simulation

Investigation of Catalyst Degradation in Proton Exchange Membrane Fuel Cell By Identical Location Electron Microscopy

Analysis of Multiphase Transport Phenomena in Pemfcs by Incorporating Microscopic Model for Catalyst Layer Structures

Insights into Oxygen Mass Transport Mechanisms in High-Temperature Proton Exchange Membrane Fuel Cells with Microelectrode

Localized Electrochemical Performance Degradation in Polymer Electrolyte Fuel Cells (PEFCs)

The Effect of Proton Conductivity of Fe–N–C–Based Cathode on PEM Fuel cell Performance

Tailoring a Three-Phase Microenvironment for High-Performance Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells