Abstract:This study investigates the structural evolution of LiMn0.5Ni0.5O2 cathode materials for Li-ion batteries as a function of synthesis temperature and its effect on electrochemical performance. It is demonstrated that, as the synthesis temperature increases from 400 to 900 °C, a gradual topotactic transformation occurs between a lithiated spinel structure, denoted herein as "lithium-excess spinel" LxS-LiMn0.5Ni0.5O2 (or LxS-LMNO), and the well-known layered LiMn0.5Ni0.5O2 structure prepared at high temperature, HT-LiMn0.5Ni0.5O2 (HT-LMNO). The electrochemical capacity of the LiMn0.5Ni0.5O2 electrodes follows a parabolic trend with increasing synthesis temperature, which is attributed primarily to the gradual transformation of 3-dimensional (3-D) to 2-dimensional (2-D) diffusion pathways for the Li ions. When synthesized at 400 °C, LxS-LiMn0.5Ni0.5O2 electrodes perform well, benefitting from the 3-D network of channels within the LxS structure. By contrast, when prepared at 500-700 °C, LiMn0.5Ni0.5O2 electrodes operate poorly, which is attributed to the formation of locally disordered structural arrangements that impede Li-ion diffusion. Such an increase in local disorder in the mid-temperature synthesis range is attributed to the structural frustration between the lithium-excess spinal and layered end-members. The transformation from the locally disordered to more ordered layered components between 700 °C and 900 °C enhances electrochemical performance. The study opens new avenues for designing next-generation Mn-rich cathode materials by fine-tuning the synthesis conditions as well as the composition and structure of LxS-LMNO electrodes.

Synthesis and Electrochemical Performance of Spinel-Type LiMn2O4 Using Γ-Mnooh Rods As Self-Template for Lithium Ion Battery

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Synthesis and Electrochemical Properties of Nanostructured LiMn2O4 for Lithium-Ion Batteries

Studies on synthesis of cathode material LiMn2O4 for lithium-ion batteries and it's electrochemical performance

Studies on Synthesis of Cathode Material LiMn2O4 for Lithium-Ion Batteries and It's Electrochemical

Limn2o4 Nanorods Synthesized by Mnooh Template for Lithium-Ion Batteries with Good Performance

Synthesis of Single-Crystalline LiMn2O4 with Different Dimensional Nanostructures for Li-ion Batteries

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Electrochemical Study on LiMn2O4 As Cathode Material for Lithium Ion Batteries

Electrochemical Performance Ni Doped Spinel LiMn2O4 Cathode for Lithium Ion Batteries

LiNi0.5Mn1.5O4 Microrod with Ultrahigh Mn3+ Content: A High Performance Cathode Material for Lithium Ion Battery

Spray-drying method to synthesis LiMn1.5Ni0.5O4 and its electrochemical characteristics as a cathode material

Optimum Synthesis of Spinel Phase LiMn_2O_4 by Rheological Phase Reaction Method

Synthesis and Electrochemical Performance of Rod-Like Spinel LiMn2O4 Coated by Li–Al–Si–O Solid Electrolyte

Microemulsion‐Assisted Synthesis of Nanosized LiMnO Spinel Cathodes for High‐Rate Lithium‐Ion Batteries

Synthesis and Performance of Cathode Material for High Voltage Li-ion Batteries

Construction of LiMn2O4 Microcubes and Spheres Via the Control of the (104) Crystal Planes of MnCO3 for High Rate Li-ions Batteries

Electrochemical studies of spinel LiNi 0.5 Mn 1.5 O 4 cathodes with different particle morphologies

Topotactic Phase Transformation of Lithiated Spinel to Layered LiMn0.5Ni0.5O2: The Interaction of 3-D and 2-D Li-ion Diffusion

Spinel Limn2o4 Nanorods As Lithium Ion Battery Cathodes

LiMn2O4 Microspheres Secondary Structure of Nanoparticles/plates As Cathodes for Li-ion Batteries