Abstract:Lead (Pb) and cadmium (Cd) are pervasive environmental pollutants known for their significant biological toxicity. The traditional methods for detecting these ions often necessitate large-scale instruments and complex procedures. In contrast, electrochemical detection methods offer advantages such as rapidity, portability, and sensitivity, making them suitable for the simultaneous detection of heavy metals. Metal-organic frameworks (MOFs), characterized by their exceptional adsorption and enrichment capabilities for heavy metal ions, have shown promise in this regard. Nevertheless, the poor conductivity of most MOFs has limited their electrochemical applications. In this study, glassy carbon electrodes (GCEs) were modified using the MOF ZIF-8, in combination with a bismuth complex and carboxylated multi-walled carbon nanotubes, resulting in the fabrication of Bi@ZIF-8/CMWCNTs/GCE electrochemical sensors. Leveraging the porous nature and large specific surface area of ZIF-8, the lead and cadmium ion adsorption by bismuth akin to mercury, and the conductivity of carboxylated multi-walled carbon nanotubes, the sensor developed in this study exhibits excellent capability for simultaneous detection of lead and cadmium ions in water. Under optimized conditions, Pb2+ 2 + and Cd2+ 2 + showed good linear relationships with the peak current in the concentration range of 2.0-50.0 mu g/L. In the concentration range studied, the regression equations for Pb2+ 2 + and Cd2+ 2 + were determined as follows: y = 0.2982x + 0.4553 (r = 0.9962) for Pb2+ 2 + and y = 0.3631x + 0.1242 (r = 0.9949) for Cd2+. 2 + . The detection limits for Pb2+ 2 + and Cd2+ 2 + were 0.76 mu g/L and 0.87 mu g/L, respectively. The relative standard deviations (RSDs) for 50 mu g/L mixed standard solution of Pb and Cd were 1.89 % and 1.23 %, respectively. Furthermore, the RSDs for the same modified electrode tested with 50 mu g/L Pb2+ 2 + and Cd2+ 2 + mixed standard solution over seven consecutive days were 2.27 % and 1.42 %, respectively, under identical conditions. In practice, the lead and cadmium concentrations of a lake were found to range from 4.42 mu g/L to 5.60 mu g/L, while the lead and cadmium concentrations of effluent from a wastewater plant ranged from 11.83 mu g/L to 14.49 mu g/L. This research not only describes a new electrochemical platform for the simultaneous determination of lead and cadmium in water but also provides a new method for the simultaneous determination of lead and cadmium in water. This research is valuable for promoting the application of MOFs in the field of electrochemistry.

SnO 2/reduced graphene oxide nanocomposite for the simultaneous electrochemical detection of cadmium(II), lead(II), copper(II), and mercury(II): An interesting favorable mutual interference

SnO<sub>2</sub>/Reduced Graphene Oxide Nanocomposite for the Simultaneous Electrochemical Detection of Cadmium(II), Lead(II), Copper(II), and Mercury(II): An Interesting Favorable Mutual Interference

Highly Sensitive Simultaneous Determination of Cadmium (II), Lead (II), Copper (II), and Mercury (II) Ions on N-doped Graphene Modified Electrode

Polysulfide/Graphene Nanocomposite Film for Simultaneous Electrochemical Determination of Cadmium and Lead Ions

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection

A New Electrochemical Sensor Based on Carboimidazole Grafted Reduced Graphene Oxide for Simultaneous Detection of Hg 2+ and Pb 2+

Simultaneous determination of trace Cd(II) and Pb(II) based on Bi/Nafion/reduced graphene oxide-gold nanoparticle nanocomposite film-modified glassy carbon electrode by one-step electrodeposition

A Highly Effective Copper Nanoparticle Coupled with RGO for Electrochemical Detection of Heavy Metal Ions

A Sensitive Electrochemical Sensor for Simultaneous Voltammetric Sensing of Cadmium and Lead Based on Fe3O4/multiwalled Carbon Nanotube/laser Scribed Graphene Composites Functionalized with Chitosan Modified Electrode

Simultaneous electrochemical sensing of heavy metal ions based on a g-C3N4/CNT/NH2-MIL-88(Fe) nanocomposite.

Synthesis of CuZrO3 Nanocomposites/graphene and Their Application in Modified Electrodes for the Co-Detection of Trace Pb(II) and Cd(II)

Nanocrystalline SnO2-Modified Electrode for Ultra-Sensitive Mercury Ion Detection

Carbon-supported X-manganate (xni, Zn, and Cu) Nanocomposites for Sensitive Electrochemical Detection of Trace Heavy Metal Ions.

The effective determination of Cd(ii) and Pb(ii) simultaneously based on an aluminum silicon carbide-reduced graphene oxide nanocomposite electrode.

Application of gold nanoparticles/polyaniline-multi-walled carbon nanotubes modified screen-printed carbon electrode for electrochemical sensing of zinc, lead, and copper

Hierarchical MgFe-layered Double Hydroxide Microsphere/graphene Composite for Simultaneous Electrochemical Determination of Trace Pb(II) and Cd(II)

Nanocrystalline SnO<sub>2</sub>-Modified Electrode for Ultra-Sensitive Mercury Ion Detection

Simultaneous Determination of Lead and Cadmium in Water by Metal Oxide Framework Complex-Modified Glassy Carbon Electrodes

A nanocomposite consisting of ionic liquid-functionalized layered Mg(II)/Al(III) double hydroxides for simultaneous electrochemical determination of cadmium(II), copper(II), mercury(II) and lead(II)

Simultaneous Determination of Cadmium(ii), Lead(ii) and Copper(ii) by Using a Screen-Printed Electrode Modified with Mercury Nano-Droplets