Abstract:Recently, metal-organic frameworks (MOFs) and their carbon derivates have been demonstrated as new electrode modifying materials for electrochemical sensing. In this work, the first example of the detection of heavy metal ions with a MOF-derived sensing platform was presented. The platform was based on a glassy carbon electrode (GCE) modified by Nafion-bismuth/nitrogen doped microporous carbon (NMC) composite, in which the NMC was derived from a zeolitic imidazolate framework-8 (ZIF-8). The good dispersibility, large specific surface area (941 m2g−1), high nitrogen content (25.0 at.%) and good electrical conductivity of the NMC materials, as well as the synergistic effects of Nafion and bismuth-film contributed to the enhanced signals of the electrode during the differential pulse anodic stripping voltammetry (DPASV) measurements for simultaneous detection of trace Cd(II) and Pb(II) in aqueous solution. The calibration curves for Cd(II) covered two linear ranges varying from 2 to 10μgL−1 and 10 to 100μgL−1. As for Pb(II), the linear calibration curves ranged from 0.5 to 10μgL−1 and 10 to 100μgL−1. The detection limits were estimated to be 1.5μgL−1 (S/N=3) for Cd(II) and 0.05μgL−1 (S/N=3) for Pb(II), which were 2 times and 200 times lower than the guideline values of drinking water given by the World Health Organization (WHO), for Cd(II) and Pb(II), respectively. In addition, the good reproducibility and stability of the modified electrode offered a promising perspective for the detection of trace metal ions in practice. Compared with other porous carbon modified electrodes that obtained by either drop-casting or screen-printing method, the proposed Nafion/Bi/NMC/GCE showed a much lower detection limit for Pb(II) and a lower or comparable detection limit for Cd(II). Moreover, the obtaining of uniformly ordered N-doped carbon polyhedron could shed light on the preparation of other heteroatom-doped electrode modifying materials for the detection of heavy metal ions.

Carbon-supported X-manganate (xni, Zn, and Cu) Nanocomposites for Sensitive Electrochemical Detection of Trace Heavy Metal Ions.

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

Application of Graphene-Based Nanocomposites in Electrochemical Detection of Heavy Metal Ions

Synthesis of CuZrO3 Nanocomposites/graphene and Their Application in Modified Electrodes for the Co-Detection of Trace Pb(II) and Cd(II)

A Sensitive Electrochemical Sensor for the Detection of Pb2+ and Cu2+ Based on NH2-MIL-101(Cr)@ZIF‑8/MWCNTs/GCE

Highly Sensitive Simultaneous Determination of Cadmium (II), Lead (II), Copper (II), and Mercury (II) Ions on N-doped Graphene Modified Electrode

Simultaneous electrochemical sensing of heavy metal ions based on a g-C3N4/CNT/NH2-MIL-88(Fe) nanocomposite.

Recent advance of nanomaterials modified electrochemical sensors in the detection of heavy metal ions in food and water

Simultaneous Electrochemical Detection of Cd2+ and Pb2+ Based on an MOF-Derived Carbon Composite Linked with Multiwalled Carbon Nanotubes

Ultrasensitive detection of Hg(II) by small-sized Mn3O4 loaded on g-C3N4 nanosheets: Heterojunction facilitates electron transfer and Mn(II)/Mn(III)/Mn(IV) cycle

Polysulfide/Graphene Nanocomposite Film for Simultaneous Electrochemical Determination of Cadmium and Lead Ions

Carbon Nanomaterials-Based Electrochemical Sensors for Heavy Metal Detection

Nanomaterials-Based Electrochemical Sensors for Heavy Metal Ions Detection

Three-dimensional graphene/amino-functionalized metal–organic framework for simultaneous electrochemical detection of Cd(II), Pb(II), Cu(II), and Hg(II)

Graphene Aerogel-Metal-Organic Framework-Based Electrochemical Method for Simultaneous Detection of Multiple Heavy Metal Ions.

Simultaneous detection of Cd(II) and Pb(II) by differential pulse anodic stripping voltammetry at a nitrogen-doped microporous carbon/Nafion/bismuth-film electrode

Photo-assisted Simultaneous Electrochemical Detection of Multiple Heavy Metal Ions with a Metal-Free Carbon Black Anchored Graphitic Carbon Nitride Sensor.

Hierarchical MgFe-layered Double Hydroxide Microsphere/graphene Composite for Simultaneous Electrochemical Determination of Trace Pb(II) and Cd(II)

In-situ synthesis of bi-metallic metal organic Framework/Polyaniline nanocomposites as ultrasensitive and selective electrodes for electrochemical detection of heavy metal ions

Preparation and Application of Bismuth/MXene Nano-Composite as Electrochemical Sensor for Heavy Metal Ions Detection

A Highly Effective Copper Nanoparticle Coupled with RGO for Electrochemical Detection of Heavy Metal Ions