Abstract:CFD methodology for subcooled flow boiling is significantly affected by the heat flux partitioning model, which plays a crucial role in predicting the mass source term generated by wall boiling of the liquid phase. Although numerous models have been proposed, most research efforts have focused on the spatial dimensions of boiling heat transfer mechanisms, neglecting the temporal aspect. This study presents a heat flux partitioning model for subcooled flow boiling that considers both temporal and spatial dimensions. The model accounts for the contribution of heat flux from the superheated liquid layer during the bubble growth stage, liquid convection during the bubble wait stage within the bubble influence area in the temporal dimension, and heat flux from the overlapping area of bubble influence in the spatial dimension. An approach was developed to determine the bubble influence area by considering the bubble interaction based on the stochastic nature of nucleation sites on the heated wall, verified by the Monte Carlo method. The bubble dynamics parameters were experimentally derived to reduce the uncertainty associated with the boiling sub-models on the calculation. A comparative analysis of boiling curves and wall heat flux partitioning was conducted between the present model and the RPI model under various flow conditions. The results indicate that both models could reasonably predict the boiling curve. However, the RPI model tends to over-predict the proportion of evaporative heat flux, which is considered a weakness. Based on physical principles, the present model accurately captures the fundamental trend of wall heat flux partitioning. This research enhances the understanding of subcooled flow boiling and increases confidence in multiphase CFD methodology predictions.

Bubble departure size in forced convective subcooled boiling flow under static and heaving conditions

Experimental Research of Bubble Characteristics in Narrow Rectangular Channel under Heaving Motion

Numerical Simulation Research of Bubble Characteristics and Bubble Departure Diameter in Subcooled Flow Boiling

Investigation of Bubble Departure Diameter in Horizontal and Vertical Subcooled Flow Boiling

Effect of Heaving Motion on Bubble Diameter Distribution in Narrow Rectangular Channel

Visualization Study on Bubble Dynamical Behavior in Subcooled Flow Boiling under Various Subcooling Degree and Flowrates

A Unified Relationship Between Bubble Departure Frequency and Diameter During Saturated Nucleate Pool Boiling

Assessment of the Force-Balance Model in Predicting the Bubble Departure Diameter in Inclined Channels

Visual Experimental Study on Bubble Characteristics Near the Heating Wall in Subcooled Flow Boiling

Effect of Heaving on Forces Acting on Bubbles in Heating Surface

Experimental and Numerical Study on Nucleate Bubble Deformation in Subcooled Flow Boiling

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling

Experimental and Theoretical Study of Bubble Coalescence and Departure Behaviors During Nucleate Pool Boiling on Uniform Smooth and Micro-Pin-finned Surfaces under Different Subcoolings and Heat Fluxes

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Bubble departure and sliding in high-pressure flow boiling of water

A SIMPLIFIED FORCE-BALANCE MODEL TO PREDICT BUBBLE DEPARTURE DIAMETER IN HORIZONTAL FLOW BOILING

INVESTIGATION OF BUBBLE DEPARTURE RADIUS IN SUBCOOLED POOL BOILING UNDER MICROGRAVITY CONDITION

A Sensitivity Analysis of Bubble Departure Behavior in Vertical Channel Nucleate Boiling

Numerical Study on Bubble Departing Behavior from Heated Surface in Subcooled Pool Boiling