Abstract:In this study, the dynamic mechanism of vapor bubble during boiling process under the effect of acoustic field was numerically investigated, by coupling the phase field method and thermo-viscous acoustic module. The purpose is to use the surface acoustic wave (SAW) to interfere with vapor bubbles in the boiling process, so as to realize control of boiling on the temporal and spatial scales while improving the boiling heat transfer capability. It is observed that the effect of SAW on bubble behaviors is related to the amplitude of SAW and the initial bubble size. For pool boiling case, at the critical displacement amplitude, tiny vortices form at the root of bubble during the bubble growth stage. The velocity amplitude induced by SAW in the liquid phase around bubble can reach up to 2.1 m/s, which is nearly twofold comparing to that without SAW effect. The vortices at the root of bubble disrupt the thermal boundary layer to a certain extent by creating ‘micro-turbulence’, thereby reducing the thermal resistance. Furthermore, the strong SAW effect for the large amplitude case causes one bubble to collapse into two separate bubbles after the bubble detaches from the heating surface. For flow boiling case, the SAW can break the growing bubbles along the flow direction, and the collapsed bubbles flow downstream with a maximum speed of 5 m/s, which is almost 12.5 times of that without acoustic excitation. The acoustic streaming can interrupt the growth of the boundary layer in the single-phase region, so that the subcooled fluid can rewet the microchannel wall in time. Thus, the growth of bubbles and flow instability are effectively inhibited, and flow boiling heat transfer is promoted. It is revealed that the SAW is an effective approach for the active control and enhancement of boiling heat transfer.

Effect of Heaving on Forces Acting on Bubbles in Heating Surface

Effect of Heaving Motion on Bubble Diameter Distribution in Narrow Rectangular Channel

Experimental Research of Bubble Characteristics in Narrow Rectangular Channel under Heaving Motion

Bubble departure size in forced convective subcooled boiling flow under static and heaving conditions

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Effect of heaving stren gth and cycle on natural circulation flow characteristics

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

Numerical Study on Bubble Behaviour and Heat Transfer Characteristics of Subcooled Pool Boiling Based on Non-Empirical Boiling and Condensation Model

Effects of Surface Wettability on Bubble Departure and Critical Heat Flux: A Parametric Study Based on 3-D Dynamic Force Analysis Model

Effect Of Bubble Geometry On Marangoni Flow Around A Vapor Bubble

Assessment of the Force-Balance Model in Predicting the Bubble Departure Diameter in Inclined Channels

Visual Experimental Study on Bubble Characteristics Near the Heating Wall in Subcooled Flow Boiling

Numerical study on the vapor bubble removal by acoustic streaming in downward-facing pool boiling

Role of Bubble Dynamics in Heat and Mass Transfer in Annular Flows

Study on the effect of multiple bubbles hydrodynamics on pool boiling heat transfer

Experimental investigation on the characteristics of bubble growth and slide on a downward-facing heater surface in flow boiling

Investigation of bubble dynamics and boiling heat transfer characteristics under vertically heating walls via lattice Boltzmann method

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Numerical study on the behavior of vapor bubbles during boiling with surface acoustic wave (SAW)