Abstract:Regarding the limited fossil fuel reserves, the renewable ethanol has been considered as one of the substitutional fuels for spark ignition (SI) engines. But due to its high latent heat, ethanol is usually hard to be well evaporated to form the homogeneous fuel–air mixture at low temperatures, e.g., at idle condition. Compared with ethanol, hydrogen possesses many unique combustion and physicochemical properties that help improve combustion process. In this paper, the performance of a hydrogen-enriched SI ethanol engine under idle and stoichiometric conditions was investigated. The experiment was performed on a modified 1.6 L SI engine equipped with a hydrogen port-injection system. The ethanol was injected into the intake ports using the original engine gasoline injection system. A self-developed hybrid electronic control unit (HECU) was adopted to govern the opening and closing of hydrogen and ethanol injectors. The spark timing and idle bypass valve opening were governed by the engine original electronic control unit (OECU), so that the engine could operate under its original target idle speed for each testing point. The engine was first fueled with the pure ethanol and then hydrogen volume fraction in the total intake gas was gradually increased through increasing hydrogen injection duration. For a specified hydrogen addition level, ethanol flow rate was reduced to keep the hydrogen–ethanol–air mixture at stoichiometric condition. The test results showed that hydrogen addition was effective on reducing cyclic variations and improving indicated thermal efficiency of an ethanol engine at idle. The fuel energy flow rate was reduced by 20% when hydrogen volume fraction in the intake rose from 0% to 6.38%. Both flame development and propagation periods were shortened with the increase of hydrogen blending ratio. The heat transfer to the coolant was decreased and the degree of constant volume combustion was enhanced after hydrogen addition. HC and CO emissions were first reduced and then increased with the increase of hydrogen blending fraction. The acetaldehyde emission from the hydrogen-enriched ethanol engine is lower than that from the pure ethanol engine. However, the addition of hydrogen tended to increase NOx emissions from the ethanol engine at idle and stoichiometric conditions.

Investigation on Idle Performance of a Spark-Ignited Ethanol Engine with Dimethyl Ether Addition

Investigation on the performance of a spark-ignited ethanol engine with DME enrichment

Combustion and Emissions Performance of a DME-enriched Spark-Ignited Methanol Engine at Idle Condition

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Investigation on Performance of a Spark-Ignition Engine Fueled with Dimethyl Ether and Gasoline Mixtures under Idle and Stoichiometric Conditions

Investigation On Combustion And Emissions Of Dme/Gasoline Mixtures In A Spark-Ignition Engine

Effect of Dimethyl Ether Addition on the Performance of Spark-ignition Ethanol Engine

Effect of Hydrogen Addition on Combustion and Emissions Performance of a Spark-Ignited Ethanol Engine at Idle and Stoichiometric Conditions

Experimental and numerical study on a SI engine fueled with gasohol and dissociated methanol gas blends at lean conditions

Improvement of Performance and Emissions of a Compression Ignition Methanol Engine with Dimethyl Ether

Effect of the Addition of Ethanol on the Combustion and Emission Characteristics of a Common-Rail Dimethyl Ether Engine

Investigation into Engine Performance of a Hydrogen-Dimethyl Ether Spark-Ignition Engine under Various Dimethyl Ether Fractions

Investigation of combustion and emissions of an SI engine with ethanol port injection and gasoline direct injection under lean burn conditions

Experimental study on the idle performance of a spark-ignition engine fueled with hydrogen-gasoline blends

Impacts of Dimethyl Ether Enrichment and Various Injection Strategies on Combustion and Emissions of Direct Injection Gasoline Engines in the Lean-Burn Condition

Load characteristics of a spark-ignited ethanol engine with DME enrichment

Effects of Combustion Phasing, Injection Timing, Relative Air-Fuel Ratio and Variable Valve Timing on Si Engine Performance and Emissions Using 2,5-Dimethylfuran

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Combustion and Emissions Characteristics of a S.I. Engine Fueled with Gasoline-Dme Blends under Different Spark Timings

THE INFLUENCE OF ETHANOL ADDITIVES ON THE PERFORMANCE AND COMBUSTION CHARACTERISTICS OF DIESEL ENGINES

Study on Combustion and Emission Characteristics of Diesel Engines Fueled with Ethanol/Diesel Blended Fuel