Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

Effects of Combustion Phasing, Injection Timing, Relative Air-Fuel Ratio and Variable Valve Timing on Si Engine Performance and Emissions Using 2,5-Dimethylfuran

Effect of Spark Timing and Load on A Disi Engine Fuelled with 2,5-Dimethylfuran

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emissions of 2,5-Dimethylfuran in a Direct-Injection Spark-Ignition Engine

Combustion characteristics and emissions of 2-methylfuran compared to 2,5-dimethylfuran, gasoline and ethanol in a DISI engine

Combustion performance of 2,5-dimethylfuran blends using dual-injection compared to direct-injection in a SI engine

Combustion Characteristics and Engine Performance of 2-Methylfuran Compared to Gasoline and Ethanol in a Direct Injection Spark Ignition Engine

Experimental and numerical study on a SI engine fueled with gasohol and dissociated methanol gas blends at lean conditions

Ignition Timing Sensitivities of Oxygenated Biofuels Compared to Gasoline in a Direct-Injection SI Engine

Split-Injection Strategies under Full-Load Using DMF, A New Biofuel Candidate, Compared to Ethanol in a GDI Engine

Engine performance and emissions of furan-series biofuels under stratified lean-burn combustion mode

Experiment of a gasoline engine fueled with gasoline-DMF blends and gasoline-alcohol blends

Experimental Investigation on the Effects of Direct Injection Timing on the Combustion, Performance and Emission Characteristics of Methanol/Gasoline Dual-Fuel Spark Turbocharged Ignition (DFSI) Engine with Different Injection Pressures under High Load

Effect of ethanol content, water injection, and compression ratio on combustion and detailed emissions in an SI-GDI engine

Spray Characteristics and Engine Adaptability of 2,5-Dimethylfuran

Effects of isopropanol ratio at different excess air ratios on combustion and emissions characteristics of an isopropanol/gasoline dual-fuel combined injection SI engine

Combustion Performance of Bio-Ethanol at Various Blend Ratios in A Gasoline Direct Injection Engine

Effects of injection and spark timings on combustion, performance and emissions (regulated and unregulated) characteristics in a direct injection methanol engine

Experiment of combustion characteristics and emissions of gasoline-DMF blends

Simulation Study on the Impact of Injection Strategies on the Performance of Methanol–Gasoline Dual-Fuel Engines

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine