Abstract:This work managed the extrusion strain path by designing various extrusion die cavities, successfully realizing the texture modification for the ZK60 magnesium alloy. The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated. Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens, but did not produce too large microstructure differences. By comparison, significant texture differences developed owing to the various extrusion die cavities, which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND. Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity. The results from the finite element analysis and the visco-plastic self-consistent model indicated that, in order to accommodate the different strain components induced by the extrusion die cavities, slip systems or tension twinning were activated differently, and this was the critical reason causing the above texture differences. One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress. Additionally, the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation, and the former generally produced the lower yield stress and the increasing stage of strain hardening rate, while the latter produced the higher yield stress and the continuous decline of strain hardening rate.

Finite Element Analysis of Strain Distribution in ZK60 Mg Alloy During Cyclic Extrusion and Compression

Finite element analysis of the equivalent strain distribution of ZK60 alloy during cyclic extrusion and compression

Study on Deformation Behavior and Strain Homogeneity During Cyclic Extrusion and Compression

In-Situ Study on Deformation Behavior of ZK60 Alloy Processed by Cyclic Extrusion and Compression

Influence of Cyclic Extrusion and Compression on the Mechanical Property of Mg Alloy Zk60

Microstructure Evolution in Magnesium Alloy Zk60 During Cyclic Extrusion and Compression

Microstructure and Texture Characteristics of Zk60 Mg Alloy Processed by Cyclic Extrusion and Compression

Microstructure and High Tensile Ductility of ZK60 Magnesium Alloy Processed by Cyclic Extrusion and Compression

Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy

Microstructure Evolution and Mechanical Properties of an Az61 Mg Alloy Through Cyclic Extrusion Compression

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation

Microstructure and mechanical properties of extrusion ZC61 alloys under different dynamic compression loading directions

Effect of Large Deformation on Microstructure of Zk60 Alloy

Combined-extrusion techniques for fabricating yield-symmetric ZK61 magnesium alloys rods focusing on texture influence on their mechanical responses

Microstructure Evolution of AZ Series Magnesium Alloys During Cyclic Extrusion Compression

Numerical simulation of the residual stress in the Mg-5Zn-3.5Sn-1Mn-0.5Ca-0.5Cu alloy with different extrusion parameters

Dynamic Deformation Mechanism Transformation and Constitutive Equation Modification of ZEK610 Alloy

Strain analysis of lateral extrusion process

Influence of Secondary Extrusion on Microstructures and Mechanical Properties of ZK60 Mg Alloy Processed by Extrusion and ECAP

Strengthening and Toughening Mechanisms of an Ultrafine Grained Mg-Gd-Y-Zr Alloy Processed by Cyclic Extrusion and Compression

Reducing the cyclic tension-compression asymmetry and cyclic hardening of ZK61 magnesium alloy via the compression-extrusion process