Abstract:By using a Rock Failure Process Analysis code, RFPA2D, numerical simulations on samples of rock-like material containing three flaws under uniaxial compressive loading are conducted to investigate the failure mechanism and crack coalescence modes. The pre-existing flaws are arranged in different systematic geometries. Friction in closed flaws is modelled by inserting ideal elasto-plastic materials into the flaws. As the uniaxial compression load is increased, new cracks propagate from the flaws and eventually coalesce. The simulations replicate most of the phenomena observed in actual experiments, such as initiation and growth of wing and secondary cracks, crack coalescence, and the macro-failure of the sample. For the samples containing three pre-existing flaws, four types of crack coalescence mode are obtained: the tensile mode (T); the compression mode (C); the shear mode (S); and the mixed tension/shear mode (TS). The C mode is mainly formed by coalescence of small tensile fractures in the form of a shear band, and is believed to correspond to the formation and growth of en-echelon cracks. The applied load required to initiate coalescence depends on which mode (tensile or shear) dominates the coalescence process. A higher load is required to cause coalescence in the shear mode (S) than that for coalescence in the tensile mode (T) and mixed mode (TS). A total of four types of samples containing three parallel inclined frictional flaws and nine samples containing two parallel inclined frictional flaws are numerically simulated. It is concluded that crack coalescence will occur following the weakest coalescence path among all possible paths between any two flaws. The results obtained in the simulations are qualitatively in good agreement with experiments presented in Part I of the accompanying paper and other reported experimental observations.

A Numerical Study On Failure Behavior Of Rock Containing Three-Dimensional Pre-Existing Flaws

Numerical Study of Failure Behaviour of Pre-Cracked Rock Specimens under Conventional Triaxial Compression

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Numerical analysis for failure evolution process of rock with initial micro defects

Analysis of Crack Coalescence in Rock-Like Materials Containing Three Flaws - Part Ii: Numerical Approach

Numerical Simulation of Crack Growth and Coalescence in Rock-Like Materials Containing Multiple Pre-existing Flaws

Numerical Study on Cracking Behavior and Fracture Failure Mechanism of Flawed Rock Materials under Uniaxial Compression

Numerical study on full-field stress evolution and acoustic emission characteristics of rocks containing three parallel pre-existing flaws under uniaxial compression

EXPERIMENTAL STUDY ON FAILURE BEHAVIOR OF ROCK CONTAINING THREE-DIMENSIONAL SINGLE PRE-EXISTING FLAW

Fracture behavior of cylindrical sandstone specimens with two pre-existing flaws: experimental investigation and PFC3D simulation

Experimental and DEM study on failure behavior and stress distribution of flawed sandstone specimens under uniaxial compression

Failure mechanism of brittle rock with 3D parallel preset flaws based on the particle displacement trend method

Experimental and numerical study on crack propagation and coalescence in rock-like materials under compression

Experimental and numerical investigation on the mechanical responses and cracking mechanism of 3D confined single-flawed rocks under dynamic loading

Cracking Evolution and Failure Mechanism of Brittle Rocks Containing Pre-Existing Flaws under Compression-Dominating Stresses: Insight from Numerical Approach

Numerical Study of Rock Failure due to the Pre-Existing Crack Initiation and Propagation and Hydraulic Fractures Interaction

Multi-Crack Coalesence in Rock-Like Material under Uniaxial and Biaxial Loading

Splitting Failure in Brittle Rocks Containing Pre-Existing Flaws under Uniaxial Compression

Numerical investigation on the influence of secondary flaw lengths on the mechanical characteristics and cracking behaviour of red sandstone containing orthogonal cross flaws

Intermediate Principal Stress Effects on the 3D Cracking Behavior of Flawed Rocks Under True Triaxial Compression

Dynamic Mechanical Response and Fracture Properties of Rock-Like Materials with Parallel and Intersecting Flaws