Abstract:Herein, an efficient, facile, scalable production of graphene dispersions via exfoliation of graphite in an environment-friendly PVA/H2O solvent system is reported. To warrant the impact of processing parameters on exfoliation efficiency, a systematic investigation is carried out using UV–visible spectroscopy. Under the optimal shearing parameters (1 h, 10 k rpm) with the PVA-to-fed graphite mass ratio of 10, a high concentration graphene dispersion (3.36 mg mL−1) is achieved. The estimated graphene yield is found to be 33% that further increases to 90% after sediment recycling. With the aim of detailed quality analysis, centrifugal cascading is adopted to predominately sort the graphene flakes from the upper end of the distribution. Through various characterization techniques, it is confirmed that the resulting dispersion comprises high-quality graphene flakes (1–5 layers) having thickness up to 1.48 nm, lateral dimension ranging from 0.3 to 4 µm, and quite a low level of defects (ID/IG = 0.1). The statistical distribution histogram reveals that most flakes are single-layer (41%), including some bi-layer (21%) and tri-layer (28%), while the remaining can be said five or multi-layer graphene. Meanwhile, the efficacy of the PVA/H2O solvent system is also demonstrated using ultrasonic exfoliation, providing a high concentration of graphene (1.1 mg mL−1) in a relatively short time (8 h). Furthermore, the applicability of the PVA-stabilized graphene dispersion is addressed by fabricating various graphene products such as graphene paper electrodes, graphene composites, and graphene thin films. Impressively, the graphene paper electrode imparts an exceptionally high specific capacitance of 199.63 F g−1 in a potential window range of 0 to 2 V, and hence could be a promising alternative to traditional electrodes in supercapacitors. Conclusively, the exfoliation of graphite in a green polymer–solvent system offers to produce highly concentrated graphene dispersions at a minimal cost that could be widely applicable in different research areas, thus holding the potential for commercial viability.

Efficient Production of Graphene through a Partially Frozen Suspension Exfoliation Process: An Insight into the Enhanced Interaction Based on Solid-Solid Interfaces

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Impact of Ultrasonic Probe Type, Frequency, and Static Pressure on Large-Scale Graphene Exfoliation

Supercritical CO2-assisted microfluidization as ultra-high efficiency strategy for graphene preparation

High-concentration graphene dispersions prepared via exfoliation of graphite in PVA/H2O green solvent system using high-shear forces

Liquid-Phase Exfoliation of Graphene: An Overview on Exfoliation Media, Techniques, and Challenges

A high-yield and size-controlled production of graphene by optimizing fluid forces

Efficient Exfoliation of Graphite in Chloroform with a Pyrene-Containing Hyperbranched Polyethylene As Stabilizer to Render Pyrene-Functionalized High-Quality Graphene

Liquid Phase Graphene Exfoliation with a Vibration-Based Acoustofluidic Effector

Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production

Self-sustained solid-state exothermic reaction for scalable graphene production

A Non-Dispersion Strategy for Large-Scale Production of Ultra-High Concentration Graphene Slurries in Water

Enhanced Exfoliation Efficiency of Graphite into Few-Layer Graphene Via Reduction of Graphite Edge

Process regulation of the electrochemical exfoliation for graphene production with graphite powder as starting materials

Solvothermal-assisted Exfoliation Process to Produce Graphene with High Yield and High Quality

Scalable production of high-quality exfoliated graphene using mechanical milling in conjugation with supercritical CO2

High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation

Efficient Production of High‐Quality Polystyrene‐Functionalized Graphene Via Graphite Exfoliation in Chloroform with a Heterobifunctional Hyperbranched Polyethylene As Stabilizer

Low-Temperature Exfoliated Graphenes: Vacuum-Promoted Exfoliation and Electrochemical Energy Storage

Scalable production of electrochemically exfoliated graphene by an extensible electrochemical reactor with encapsulated anode and dual cathodes

High yield production of graphene by liquid phase exfoliation of graphite