Abstract:Electrochemical exfoliation starting with graphite powder as the raw material for graphene production shows superiority in cost effectiveness over the popular bulk graphite. However, the crucial conductive network inside the graphite powder electrode along with its formation and influence mechanisms remains blank. Here, an adjustable-pressure graphite powder electrode with a sandwich structure was designed for this. Appropriate encapsulation pressure is necessary and conducive to constructing a continuous and stable conductive network, but overloaded encapsulation pressure is detrimental to the exfoliation and graphene quality. With an initial encapsulation pressure (IEP) of 4 kPa, the graphite powders expand rapidly to a final stable expansion pressure of 49 kPa with a final graphene yield of 46.3%, where 84% of the graphene sheets are less than 4 layers with ID/IG values between 0.22 and 1.24. Increasing the IEP to 52 kPa, the expansion pressure increases to 73 kPa, but the graphene yield decreases to 39.3% with a worse graphene quality including higher layers and ID/IG values of 1.68-2.13. In addition, small-size graphite powders are not suitable for the electrochemical exfoliation. With the particle size decreasing from 50 to 325 mesh, the graphene yield decreases almost linearly from 46.3% to 5.5%. Conductive network and electrolyte migration synergize and constrain each other, codetermining the electrochemical exfoliation. Within an encapsulated structure, the electrochemical exfoliation of the graphite powder electrode proceeds from the outside to the inside. The insights revealed here will provide direction for further development of electrochemical exfoliation of graphite powder to produce graphene.

Low-Temperature Exfoliated Graphenes: Vacuum-Promoted Exfoliation and Electrochemical Energy Storage

Supercapacitors Based on Low-Temperature Partially Exfoliated and Reduced Graphite Oxide

Towards low temperature thermal exfoliation of graphite oxide for graphene production

Low-temperature Exfoliation of Multilayer-Graphene Material from FeCl3 and CH3NO2 Co-Intercalated Graphite Compound.

Bottom-up Stripping of Graphene with Controlled Oxidation Behaviors Towards Supercapacitors Energy Storage

Construction of Three-Dimensional Conductive Graphitic Architecture by Highly Efficient Electrochemical Exfoliation

Environmentally Friendly Approaches Toward the Production of Processable Graphene by Exfoliation of Graphite Using Ionic Liquid

Electrochemical Exfoliation of Graphite into Nitrogen-doped Graphene in Glycine Solution and its Energy Storage Properties

Enhanced Exfoliation Efficiency of Graphite into Few-Layer Graphene Via Reduction of Graphite Edge

Microwave-Assisted Production Of Giant Graphene Sheets For High Performance Energy Storage Applications

Exfoliated Graphite: Room Temperature Exfoliation and Their Applications

Laser Cutting Coupled with Electro-Exfoliation to Prepare Versatile Planar Graphene Electrodes for Energy Storage

Improved Synthesis of Graphene Flakes from the Multiple Electrochemical Exfoliation of Graphite Rod

Preparation of colloidal graphene in quantity by electrochemical exfoliation

Regulating cations and solvents of the electrolyte for ultra-efficient electrochemical production of high-quality graphene

A Green Approach to the Synthesis of High-Quality Graphene Oxide Flakes via Electrochemical Exfoliation of Pencil Core

Efficient Production of Graphene through a Partially Frozen Suspension Exfoliation Process: An Insight into the Enhanced Interaction Based on Solid-Solid Interfaces

Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production

Thermal Exfoliation of Layered Metal–Organic Frameworks into Ultrahydrophilic Graphene Stacks and Their Applications in Li–S Batteries

Valorization of Waste Graphite in Spent Lithium-Ion Batteries to Graphene Via Modified Mechanical Exfoliation and the Mechanism Exploration

Room-Temperature Intercalation and ∼1000-Fold Chemical Expansion for Scalable Preparation of High-Quality Graphene