Abstract:Herein, an efficient, facile, scalable production of graphene dispersions via exfoliation of graphite in an environment-friendly PVA/H2O solvent system is reported. To warrant the impact of processing parameters on exfoliation efficiency, a systematic investigation is carried out using UV–visible spectroscopy. Under the optimal shearing parameters (1 h, 10 k rpm) with the PVA-to-fed graphite mass ratio of 10, a high concentration graphene dispersion (3.36 mg mL−1) is achieved. The estimated graphene yield is found to be 33% that further increases to 90% after sediment recycling. With the aim of detailed quality analysis, centrifugal cascading is adopted to predominately sort the graphene flakes from the upper end of the distribution. Through various characterization techniques, it is confirmed that the resulting dispersion comprises high-quality graphene flakes (1–5 layers) having thickness up to 1.48 nm, lateral dimension ranging from 0.3 to 4 µm, and quite a low level of defects (ID/IG = 0.1). The statistical distribution histogram reveals that most flakes are single-layer (41%), including some bi-layer (21%) and tri-layer (28%), while the remaining can be said five or multi-layer graphene. Meanwhile, the efficacy of the PVA/H2O solvent system is also demonstrated using ultrasonic exfoliation, providing a high concentration of graphene (1.1 mg mL−1) in a relatively short time (8 h). Furthermore, the applicability of the PVA-stabilized graphene dispersion is addressed by fabricating various graphene products such as graphene paper electrodes, graphene composites, and graphene thin films. Impressively, the graphene paper electrode imparts an exceptionally high specific capacitance of 199.63 F g−1 in a potential window range of 0 to 2 V, and hence could be a promising alternative to traditional electrodes in supercapacitors. Conclusively, the exfoliation of graphite in a green polymer–solvent system offers to produce highly concentrated graphene dispersions at a minimal cost that could be widely applicable in different research areas, thus holding the potential for commercial viability.

A high-yield and size-controlled production of graphene by optimizing fluid forces

High yield production of graphene by liquid phase exfoliation of graphite

Fluid dynamics: an emerging route for the scalable production of graphene in the last five years

Impact of Ultrasonic Probe Type, Frequency, and Static Pressure on Large-Scale Graphene Exfoliation

A Non-Dispersion Strategy for Large-Scale Production of Ultra-High Concentration Graphene Slurries in Water

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Preparation of graphene by jet cavitation

Liquid-Phase Exfoliation of Graphene: An Overview on Exfoliation Media, Techniques, and Challenges

Liquid Phase Graphene Exfoliation with a Vibration-Based Acoustofluidic Effector

Effects of Processing Parameters on Massive Production of Graphene by Jet Cavitation.

Supercritical CO2-assisted microfluidization as ultra-high efficiency strategy for graphene preparation

Novel Cyclic Ultrasound-Assisted Liquid Phase Exfoliation of Graphene in Deionized Water: A Parameter Study

Scalable production of electrochemically exfoliated graphene by an extensible electrochemical reactor with encapsulated anode and dual cathodes

High-concentration shear-exfoliated colloidal dispersion of surfactant–polymer-stabilized few-layer graphene sheets

High yield of graphene by dispersant-free liquid exfoliation of mechanochemically delaminated graphite

High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation

High-concentration graphene dispersions prepared via exfoliation of graphite in PVA/H2O green solvent system using high-shear forces

Efficient Exfoliation of Graphite in Chloroform with a Pyrene-Containing Hyperbranched Polyethylene As Stabilizer to Render Pyrene-Functionalized High-Quality Graphene

Industrial-scale production of high-quality graphene sheets by millstone grinders

Controlled Inertial Cavitation as a Route to High Yield Liquid Phase Exfoliation of Graphene

A facile liquid phase exfoliation method to prepare graphene sheets with different sizes expandable graphite