Abstract:In recent years, there has been widespread interest in the design of microair vehicles (MAVs) for flapping flight with high-aspect ratio wings due to their high efficiency and energy savings. However, the flexibility of a flapping wing causes the aeroelastic effect, which remains a subject of investigation. Generally, existing research simulates active bending and twisting of flexible wings under the assumption of neglecting flapping inertia. In this research, the kinematic optimization of a bionic wing with passive deformation in forward flight while undergoing flapping and pitching is considered. To this end, a computational aeroelasticity framework, which includes the three-dimensional unsteady vortex lattice method (UVLM) and the Newmark-β method, is constructed for flapping flight. Under the assumption of linear elastic deformation, this tool is capable of simulating attached flows over a thin wing and capturing unsteady effects of wakes. A bionic numerical wing with an aspect ratio of 6.5, chord Reynolds number of 1.9 × 105, and reduced frequency less than 0.1 is investigated in kinematic optimization. The computational aeroelasticity framework is combined with a global optimization algorithm to identify the optimal kinematics that maximize the propulsive efficiency under the minimum average lift constraint. Two types of numerical wings, rigid wing and flexible wing, are considered here to compare the influence of deformation on the aerodynamics of the flapping wing. The results show that the aeroelastic effect, which increases the flapping amplitude, yields a significant improvement in terms of propulsive efficiency. In addition, the optimization algorithm maximizes the thrust efficiency while satisfying the required lift. Moreover, the optimal kinematics of both the rigid wing and the flexible wing reach the maximum flapping angle, which indicates that a larger range of motions is needed for optimal kinetics when loosening the boundary conditions.

An Optimization on Single-crank-double-rocker Flapping Wing Mechanism

Mechanism Design and Motion Analysis of a Flapping-Wing Air Vehicle

Structural Design and Analysis of Small Flapping Wing Aircraft Based on the Crank Slider Mechanism

Optimization of Lift Force for a Bio-Inspired Flapping Wing Model in Hovering Flight

Aerodynamic optimization of a micro flapping rotary wing in hovering flight

Kinematic Optimization of a Flexible Wing Undergoing Flapping and Pitching

A Smooth Impact Drive Mechanism Actuation Method for Flapping Wing Mechanism of Bio-Inspired Micro Air Vehicles

Parametric Study and Experimental Investigations of a Single Crank–Slotted Dual Lever Mechanism for MAV Flapping Actuation

Design and motion analysis of a space crank rocker biomimetic aircraft

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Design, Analysis and Prototyping of One-DoF Drive Mechanism for Flapping Wing Micro-aerial Vehicle Application

Design optimization and experimental study of a novel mechanism for a hover-able bionic flapping-wing micro air vehicle

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

The Optimisation of Aerodynamic Performance Enhancement of a Flapping Wing using Response Surface Methodology

Design and Mechanical Analysis of Bionic Foldable Beetle Wings

Design and Analysis of A Two-stage Bionic Flapping Wing Aircraft

Design, Fabrication, and Analysis of Flapping and Folding Wing Mechanism for a Robotic Bird

Mechanism Design and Kinematics Analysis of a Bio-Inspired Flexible Flapping Wing

Design and aerodynamic characteristic analysis of unfolding-bending bionic flapping-wing aircraft

A Novel Actuation Strategy for an Agile Bio-inspired FWAV Performing a Morphing-coupled Wingbeat Pattern

A Rigid-Flexible Coupling Mechanism-based Foldable and Angle of Attack Adjustable Flapping Wing