Abstract:In recent years, there has been widespread interest in the design of microair vehicles (MAVs) for flapping flight with high-aspect ratio wings due to their high efficiency and energy savings. However, the flexibility of a flapping wing causes the aeroelastic effect, which remains a subject of investigation. Generally, existing research simulates active bending and twisting of flexible wings under the assumption of neglecting flapping inertia. In this research, the kinematic optimization of a bionic wing with passive deformation in forward flight while undergoing flapping and pitching is considered. To this end, a computational aeroelasticity framework, which includes the three-dimensional unsteady vortex lattice method (UVLM) and the Newmark-β method, is constructed for flapping flight. Under the assumption of linear elastic deformation, this tool is capable of simulating attached flows over a thin wing and capturing unsteady effects of wakes. A bionic numerical wing with an aspect ratio of 6.5, chord Reynolds number of 1.9 × 105, and reduced frequency less than 0.1 is investigated in kinematic optimization. The computational aeroelasticity framework is combined with a global optimization algorithm to identify the optimal kinematics that maximize the propulsive efficiency under the minimum average lift constraint. Two types of numerical wings, rigid wing and flexible wing, are considered here to compare the influence of deformation on the aerodynamics of the flapping wing. The results show that the aeroelastic effect, which increases the flapping amplitude, yields a significant improvement in terms of propulsive efficiency. In addition, the optimization algorithm maximizes the thrust efficiency while satisfying the required lift. Moreover, the optimal kinematics of both the rigid wing and the flexible wing reach the maximum flapping angle, which indicates that a larger range of motions is needed for optimal kinetics when loosening the boundary conditions.

Design and aerodynamic characteristic analysis of unfolding-bending bionic flapping-wing aircraft

Research on Aerodynamic Characteristics of Bionic Flapping-wing Aircraft Based on Fluid-solid Coupling

Design and Analysis of A Two-stage Bionic Flapping Wing Aircraft

Effects of dynamical spanwise retraction and stretch on flapping-wing forward flights

Design of bionic active folding flapping wing vehicle

Experimental study on the effect of bionic flap parameters on airfoil aerodynamic performance

The Effect of Spanwise Folding on the Aerodynamic Performance of a Passively Deformed Flapping Wing

Modeling, Simulation and Implementation of a Bird-Inspired Morphing Wing Aircraft

Analysis and Design of Bat-Like Flapping-Wing Aircraft

Investigating the Mechanical Performance of Bionic Wings Based on the Flapping Kinematics of Beetle Hindwings

Aerodynamic Analysis of a Flapping Wing Aircraft for Short Landing

Simulation Analysis of the Aerodynamic Performance of a Bionic Aircraft with Foldable Beetle Wings in Gliding Flight

Analyzing the kinematics and longitudinal aerodynamics of a four-wing bionic aircraft

Design and flight test of the fixed-flapping hybrid morphing wing aerial vehicle

A Rigid-Flexible Coupling Mechanism-based Foldable and Angle of Attack Adjustable Flapping Wing

Design and Mechanical Analysis of Bionic Foldable Beetle Wings

Structural Design and Analysis of Small Flapping Wing Aircraft Based on the Crank Slider Mechanism

Kinematic Optimization of a Flexible Wing Undergoing Flapping and Pitching

A review of bird-like flapping wing with high aspect ratio

Aerodynamic modeling of a flexible flapping-wing micro-air vehicle in the bond graph environment with the aim of assessing the lateral control power