Abstract:A new machining technique called ultrasonic assisted electrochemical magnetic abrasive machining integrates ultrasonic vibrations, electrochemical machining and magnetic abrasive finishing is used to machine and finish biomaterials more efficiently as compared to single process. This investigation highlights a novel technique for machining of hard materials in order to improve machining efficiency with hybrid process. Experimental design of Taguchi L27 and TOPSIS methods are implemented to find the optimum parameters of process. The objective is to maximize MRR and PISF and minimize PCMH simultaneously. This research investigates the interaction between input parameters (rotational speed of work piece, machining time, working gap, ultrasonic frequency time and voltage) and their effect on output characteristics of process like MRR, PCMH and PISF. The recommended settings of parameters for UEMAM process is found to be rotational speed = 600 rpm, machining time = 5 minutes, working gap = 3 mm, frequency time = 4 sec and voltage = 3 V from TOPSIS and rotational speed = 600 rpm, machining time = 15 minutes, working gap = 3 mm, frequency time = 6 sec and voltage = 4.5 V from Taguchi optimization plot. A comparison of experimental results and theoretical results have been done to validate the proposed mathematical model. The calculation results of the model showed that the maximum value of error is not more than 7.351 while comparing with experimental results, which suggests that the mathematical model is reasonable.

Development of Parameters Selection System for Ultrasonic Vibration Assisted Electro-Discharge Machining

Research on the System Matching Model in Ultrasonic Vibration-Assisted Grinding

Parameters Optimization of Fast-Cutting Wire-Cut Electrical Discharge Machining Process

Dynamics modeling for the ultrasonic machining tool using a data-driven approach and a D-RBFNN

Research on intelligent decision method of computer-aided manufacturing numerical control parameters based on model-based definition and back propagation neural networks

Intelligent Selection of Processing Parameters in Abrasive Water Jet Cutting Based on Artificial Neural Network

An Intelligent Selection System for Awj Cutting Process Parameters Based on Ai Technology

Integrated ANN-LWPA for cutting parameter optimization in WEDM

Mathematical modeling and process parameters optimization of ultrasonic assisted electrochemical magnetic abrasive machining

NC Ultrasonic Machining Efficiency: Neural Network-Based Modeling and Simulation

Energy Prediction for Rotating Ultrasonic Machining Based on Neural Network Model.

Process parameter modeling and multi-response optimization of wire electrical discharge machining NiTi shape memory alloy

Modeling and Simulation for Effect in Numerical Controlled Ultrasonic Machining Based on Artificial Neural Network

Development of empirical models for the prediction of surface functional parameters in ultrasonic elliptical vibration cutting

Precision Obtained Using an Artificial Neural Network for Predicting the Material Removal Rate in Ultrasonic Machining

Technological parameters simulation of cutting red copper by wire cut electrical discharge machining.

Prediction model of grind machining of engineering ceramics based on BP neural network

The Modeling and Parameter Optimization for Electrical Discharge Machining(EDM)

Soft Computing Models and Intelligent Optimization System in Electro-Discharge Machining of SiC/Al Composites

Optimization of Machining Parameters Based on Principal Component Analysis and Artificial Neural Network

Experimental research and multi-objective optimization of ultrasonic vibration–assisted EDM for Ti6Al4V micro-holes