Abstract:5-Degree-of-freedom parallel kinematic machine tools are always attractive in manufacturing industry due to the ability of five-axis machining with high stiffness/mass ratio and flexibility. In this article, error modeling and sensitivity analysis of a novel 5-degree-of-freedom parallel kinematic machine tool are discussed for its accuracy issues. An error modeling method based on screw theory is applied to each limb, and then the error model of the parallel kinematic machine tool is established and the error mapping Jacobian matrix of 53 geometric errors is derived. Considering that geometric errors exert both impacts on value and direction of the end-effector's pose error, a set of sensitivity indices and an easy routine for sensitivity analysis are proposed according to the error mapping Jacobian matrix. On this basis, 10 vital errors and 10 trivial errors are identified over the prescribed workspace. To validate the effects of sensitivity analysis, several numerical simulations of accuracy design are conducted, and three-dimensional model assemblies with relevant geometric errors are established as well. The simulations exhibit maximal -0.10% and 0.34% improvements of the position and orientation errors, respectively, after modifying 10 trivial errors, while minimal 65.56% and 55.17% improvements of the position and orientation errors, respectively, after modifying 10 vital errors. Besides the assembly reveals an output pose error of (0.0134 mm, 0.0020 rad) with only trivial errors, while (2.0338 mm, 0.0048 rad) with only vital errors. In consequence, both results of simulations and assemblies validate the correctness of the sensitivity analysis. Moreover, this procedure can be extended to any other parallel kinematic mechanisms easily.

Error modeling and accuracy optimization of rotating ultrasonic vibration assisted EDM machine tool

Volumetric error modeling and decoupled error compensation analysis of five-axis CNC machine tools

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

An Error Prediction Model of NC Machining Process Considering Multiple Error Sources

Synthetic Error Modeling for NC Machine Tools Based on Intelligent Technology

Geometric Error Contribution Modeling and Sensitivity Evaluating for Each Axis of Five-Axis Machine Tools Based on POE Theory and Transforming Differential Changes Between Coordinate Frames

Numerical Solution of Simultaneous Equations Based Geometric Error Compensation for CNC Machine Tools with Workpiece Model Reconstruction

A systematic spatial-variably volumetric error model and machining optimization method based on continuous moving support variation of machine tool

Modeling Volumetric Errors of Universal Spindle Head of Five-axis CNC Machine Tool

F Test-Based Automatic Modeling of Single Geometric Error Component for Error Compensation of Five-Axis Machine Tools

NC Codes Optimization for Geometric Error Compensation of Five-Axis Machine Tools with One Novel Mathematical Model

Error modeling and sensitivity analysis of a novel 5-degree-of-freedom parallel kinematic machine tool

Accuracy improvement of volumetric error modeling in CNC machine tools

Elasto-geometrical Error Modeling and Compensation of a Five-Axis Parallel Machining Robot

Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement

Improving machining accuracy of complex precision turning-milling machine tools

Modeling and analysis of axial thermal error in machining space of double-swing five-axis machine tool

Geometric Error Modeling of Machine Tools Based on Screw Theory

High-precision modeling of CNCs’ spatial errors based on screw theory

Experimental research and multi-objective optimization of ultrasonic vibration–assisted EDM for Ti6Al4V micro-holes