Abstract:Electroactive polypyrrole (Pg) thin films were grown by potentiostatic electropolymerization at chemically derivatized interdigitated microsensor electrodes (IMEs) of gold on borosilicate glass leading to specific adhesion of the electroconductive polymer film to the device. Films were grown to a constant electropolymerization charge density of 70 mC/cm(2) at 0.65 V vs Ag-0/AgCl, 3 M Cl- from 1.0 M aqueous pyrrole solutions containing 2.5 mM poly(styrenesulfonic acid) (PSSA) and 2.5 mM dodecylbenzynesulfonate with the pH adjusted to 3.0 and the temperature maintained at 20 degrees C. The interdigit space of the IME devices was chemically derivatized by chemical modification with (3-aminopropyl)trimethoxysilane followed by direct linking of the primary amine to the carboxylic acid of 3-(1-pyrrolyl)propionic acid using the heterobifunctional linker 1,3-diisopropylcarbodiimide enhanced with N-hydroxysulfosuccinimide in aqueous solution. XPS evidence supports the immobilization of omega-(1-pyrrolyl) moieties to the device surface. The 3-(1-pyrrolyl)propionic acid was shown to be electroactive, electropolymerizable, and co-electropolymerizable with pyrrole monomer from aqueous solution. Electroconductive PPy films grown on these omega-(1-pyrrolyl) derivatized IME devices were allowed to bridge the interdigit space and so pyrrole monomer was co-electropolymerized with omega-(1-pyrrolyl) moieties specifically attached to the interdigit space of the device. This leads to specific adhesion of the PPy thin film to the device surface. Films grown in this way were compared to films similarly grown on unmodified devices, on IME: devices rendered hydrophobic by chemical modification with dodecyltrichlorosilane, and on devices modified with (3-aminopropyl)trimethoxysilane. Cyclic voltammetry revealed no significant difference in the electroactivity of PPy films grown on these various IME surfaces. Films were also characterized by the time to adhesive failure using the adhesive tape test following immersion in PBKCl 7.2 buffer or after being maintained dry under vacuum and over desiccating molecular sieves. The time to adhesive failure in both test environments occurred in the order unmodified < dodecyltrichlorosilane modified much less than (3-aminopropyl)trimethoxysilane modified much less than omega-(1-pyrrolyl) derivatized. The failure times were 3 days < 5 days much less than 27 days much less than 235 + days for films immersed in aqueous buffer and were 3 days < 36+ days much less than 235+ days much less than 235+ days for films stored dry under vacuum. The electrochemical and adhesion test evidence suggest that the PPy films are specifically immobilized to the omega-(1-pyrrolyl) derivatized IME: devices and that this negates the hydrolytic instability of the PPy/glass interface that leads to poor adhesion under physiologic conditions.

Electrochemical synthesis of polypyrrole for the immobilization of galactose oxidase

Electrogeneration of polypyrrole/alginate films for immobilization of glucose oxidase.

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Enzymatic Activity of Glucose Oxidase Covalently Wired Via Viologen to Electrically Conductive Polypyrrole Films

ELECTROCHEMICAL-BEHAVIOR, APPLICATION AND IMMOBILIZATION OF GLUCOSE-OXIDASE AT NANOMETER-SIZED ULTRAMICROBAND GOLD ELECTRODE

Polypyrrole Nanoflake Array For Glucose Biosensing

Specific immobilization of electropolymerized polypyrrole thin films onto interdigitated microsensor electrode arrays

Organic β-cyclodextrin Nanoparticle: An Efficient Building Block Between Functionalized Poly(pyrrole) Electrodes and Enzymes

Electrochemical Study of a Polypyrrole Film/Decanethiol Self-Assembled Monolayer on a Gold Electrode

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode.

Surface Functionalization of Polypyrrole Film with Glucose Oxidase and Viologen

Glucose Oxidase Immobilized on a Functional Polymer Modified Glassy Carbon Electrode and Its Molecule Recognition of Glucose

Properties of Dendrimer‐Encapsulated Pt Nanoparticles Doped Polypyrrole Composite Films and Their Electrocatalytic Activity for Glucose Oxidation

Aqueous polythiophene electrosynthesis: A new route to an efficient electrode coupling of PQQ-dependent glucose dehydrogenase for sensing and bioenergetic applications

Preparation, Characterization and Electrochemical Properties of Polypyrrole-Polystyrene Sulfonic Acid Composite Film

Application of Polypyrrole/gox Film to Glucose Biosensor Based on Electrochemical-Surface Plasmon Resonance Technique

Enzyme mediated synthesis of polypyrrole in the presence of chondroitin sulfate and redox mediators of natural origin

Polypyrrole Nanowire Gels Based on Templating Fabrication and Their Energy Storage and Electrochemical Sensing Properties

Fabrication of polymeric ionic liquid/graphene nanocomposite for glucose oxidase immobilization and direct electrochemistry.

Preparation of polypyrrole microstructures by direct electrochemical oxidation of pyrrole in an aqueous solution of camphorsulfonic acid

Oxidative Polymerization of 5-Hydroxytryptamine to Physically and Chemically Immobilize Glucose Oxidase for Electrochemical Biosensing.