Hysteretic Behaviors Of Steel Frames With Concrete-Filled L-Shaped Steel Tubular Columns
Shen Zuyan,Lin Zhenyu,Luo Jinhui,Zhang Jicheng,Li Yuanqi
2009-01-01
Abstract:In this paper, considering the main parameters varied in the specimens, including width-to-thickness ratio of steel plates, aspect ratio and eccentricity of L-shaped sections, and slenderness ratio and axial load ratio of members, four concrete-filled L-shaped steel tube stubs for statically axial compression, six CFLT columns for statically eccentrically compression and six CFLT columns for cyclic lateral loading under constant axial compression load were tested firstly. Based on the experiments and numerical analysis, simplified design formulas for estimating the load-carrying capacities under axial and eccentric compression of CFLT columns, as well as the simplified lateral load-displacement hysteretic models under eccentric compression were proposed. Then, pseudo-static tests for six full-scaled joint connections coming from plane frames and three from space frames with CFLT columns and H-shaped steel beams were carried out to investigate the effects of several main parameters, i.e., axial load ratio, stiffness ratio of beam to column, width-thickness of L-shaped steel tubes, and loading directions, on the aseismic behaviors of the joint connections. Based on the tests, the lateral load-displacement hysteretic curves and the skeleton curves of the joints connections were obtained. Finally, four 1/2.5 scaled space frames with CFLT columns and H-shaped steel beams were tested to investigate the effects of different axial load ratios and loading directions on the aseismic behaviors of the frames. Possible damage process of the CFLT frames under seismic action were observed, and the lateral load-displacement hysteretic curves and skeleton curves at the top of the frames were obtained. All the research findings may offer experimental, theoretical and technical support to the structural design of steel frames with CFLT columns.