Abstract:The interface heat transfer coefficient (IHTC) at the different casting/shell mold interfaces during the vacuum investment casting process was investigated by measuring the temperatures of K4169 superalloy melt and mold shell during the preheating, transferring, pouring, and solidification processes. The inverse model of ProCAST was used to calculate the interface heat transfer coefficient (IHTC) based on the temperature measurement results. The inverse calculation results show that the heat transfer between the shell mold and the outside air changes from natural convection to forced convection during the transfer process, but the heat transfer between the shell mold and the inside air is consistently natural convection heat transfer. Then, the convective heat transfer coefficient gradually decreases to 0.1 W/m 2 ·K with the vacuum increases and is finally converted to radiation heat transfer at a vacuum of 10 -3 Pa. In the early stages of solidification, the IHTC between the shell mold and the casting can reach 16,000 W/m 2 ·K due to the close contact and the large temperature difference between them, and with the thermal expansion of the shell mold and cooling contraction of the casting, the formation of the gap leads to the interfacial heat transfer coefficient gradually stabilizing at 100–200 W/m 2 ·K. The experimental validation results show that the IHTC has a great influence on the accuracy of the prediction of the location and shape of shrinkage porosities in the vacuum investment castings.

Regularized Determination of Interfacial Heat Transfer Coefficient During ZL102 Solidification Process

Determination of Interfacial Heat Transfer Coefficient at the Frozen Sand Mold Casting Process of ZL101 Alloy

Determination of the Interfacial Heat Transfer Coefficient at the Metal-Sand Mold Interface in Low Pressure Sand Casting

Investigation and Application of Inverse Determination of Interfacial Heat Transfer Coefficient in Vacuum Investment Casting

Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy

An Inverse Estimation of Frozen Sand Mold-Melt Heat Transfer Coefficient in the Solidification of A356 Alloy

STUDY OF INTERFACIAL HEAT TRANSFER COEFFI-CIENT BETWEEN METAL AND DIE DURING HIGH PRESSURE DIE CASTING PROCESS OF ALUMINUM ALLOY ADCl2Z

Determination of Interfacial Heat Transfer Coefficient and Its Application in High Pressure Die Casting Process

RELATIONSHIP BETWEEN METAL-DIE INTERFACIAL HEAT TRANSFER COEFFICIENT AND CASTING SOLIDIFICATION RATE IN HIGH PRESSURE DIE CASTING PROCESS

A Study of the Interfacial Heat Transfer Between an Iron Casting and A Metallic Mould

Study on the Heat Transfer at the Casting-Mould Interface in Resin-Bonded Sand Mould Casting of Mg-Gd-Y-Zr Alloy

Measurement of Temperature Inside Die and Estimation of Interfacial Heat Transfer Coefficient in Squeeze Casting

Development of Thermal Boundary Condition Model at Metal/die Interface of High Pressure Die Casting Process

Study on Heat Transfer Behavior at Metal/Die Interface in Aluminum Alloy Die Casting Process - I. Experimental Study and Determination of the Interfacial Heat Transfer Coefficient

Determination Of The Metal/Die Interfacial Heat Transfer Coefficient And Its Application In Evaluating The Pressure Distribution Inside The Casting During The High Pressure Die Casting Process

Study on the Relationship Between Interfacial Heat Transfer Coefficient and Interface Pressure in Squeeze Casting by Using Microscopic Contact Model

Determination of the Heat Transfer Coefficient at Metal–die Interface of High Pressure Die Casting Process of AM50 Alloy

Numerical Simulation of Fluid Flow and Solidification in Continuous Slab Casting Mould Based on Inverse Heat Transfer Calculation

Determination of Interfacial Heat Transfer Behavior at the Metal/Shot Sleeve of High Pressure Die Casting Process of AZ91D Alloy

Thermal stress simulation considering mechanical interaction between casting and mold

Equivalent Heat Transfer Coefficient at Casting/Cu Mould Interface and Temperature Field Simulation