Abstract:Steel slag is a calcium-rich but hydration-inactive material. Accelerated carbonation is an effective method to activate its reactivity. In this study, a kind of widely available steel slag, basic oxygen furnace slag (BOFS), was used as the sole material for fabricating dry-mixed compacts; the interactions of casting pressure, water to solid (w/s) ratio and carbonation duration were investigated in terms of their effects on CO2 uptake and compressive strength, with the emphasis of finding the parametric interdependence and the optimized parameters. The results suggested that the casting pressure and water addition determined the framework i.e., initial air voids for BOFS activation. The initial air voids inherent in different sample preparation scenarios described the CO2 uptake and strength behavior. It was found that the optimal casting pressure and w/s for BOFS carbonation to achieve the highest compressive strength (45.57 ± 2.10 MPa) and sequestrate considerable amount of CO2 (9.56 wt%) were 15 MPa and 0.13, respectively. Additionally, adopting optimized parameters enabled the exemption of preconditioning and could simplify the curing process at plant setting. It was also highlighted in this study that the maximized density did not correspond to the highest strength since over compactness of the matrix could restrain the CO2 diffusion for carbonation. Also, portlandite, brucite, larnite, tricalcium aluminate, brownmillerite and some amorphous phases were the critical reactive phase towards carbonation while metal oxides and their solid solution were inert. This study provided insight into the development of CO2-activated BOFS-based construction products towards either environment- or property highlighted purposes.

Steel Slag Carbonation by Orthogonal Experiment

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Interdependent factors contributing towards carbonation of steel slag compact: consideration of casting pressure, water dosage and carbonation duration

Evaluation of Potential Factors Affecting Steel Slag Carbonation

Analysis of Mechanical Performance and Microstructure of Steel Slag Processed with Accelerated Carbonation

Carbon sequestration of steel slag and carbonation for activating RO phase

A Review on the Carbonation of Steel Slag: Properties, Mechanism, and Application

Use of steel slag as carbonation material: A review of carbonation methods and evaluation, environmental factors and carbon conversion process

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

Accelerated carbonation of steel slag: A review of methods, mechanisms and influencing factors

Effects of carbonation degree on the hydration reactivity of steel slag in cement-based materials

Enhanced Steelmaking Slag Mineral Carbonation in Dilute Alkali Solution

Impacts of Hydration Degree of Steel Slag on Its Subsequent CO2 Capture Behaviors and Mechanical Performances of Prepared Building Materials

Improving the Carbonation of Steel Slags Through Concurrent Wet Milling

Multiple model approach to evaluation of accelerated carbonation for steelmaking slag in a slurry reactor

Utilization of accelerated carbonation to enhance the application of steel slag: a review

Accelerated Carbonation of Steel Slag and Their Valorisation in Cement Products: A Review

Accelerated carbonation and stabilization of BOF slag: data fitting relationship between particle size and CO2 sequestration

In-situ investigation on the carbonation behaviors of various mineral phases in steel slag: The role of RO phase

Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size

Accelerated carbonation of steel slag monoliths at low CO2 pressure – microstructure and strength development