Abstract:Kinetic factors that facilitate carbon nanotube (CNT) migration in a polymer blend from a high-density polyethylene (HDPE) phase to a poly (p-phenylene ether) (PPE) phase were studied, with the objective to induce CNT migration and localization at the interface. Herein, a CNT filler was pre-localized in an HDPE polymer and then blended with PPE at different blend compositions of 20:80, 40:60, 60:40, and 80:20 of PPE/HDPE at a constant filler concentration of 1 wt%. The level of CNT migration was studied at different mixing times of 5 and 10 min. The electrical conductivity initially increased by 2–3 orders of magnitude, with an increase in the PPE content up to 40%, and then it decreased significantly by up to 12 orders of magnitude at high PPE content up to 100%. We determined that the extent of migration was related to the difference in the melt viscosity between the constituent polymers. A triblock copolymer styrene-ethylene/butylene-styrene (SEBS) was used to improve the blend miscibility, and 2 wt% copolymer was found to be the optimum concentration for the electrical properties for the two blend compositions of 20:80 and 80:20 of PPE/HDPE, at a constant filler concentration of 1 wt%. The introduction of the SEBS triblock copolymer significantly increased the conductivity almost by almost four orders of magnitude for PPE/HDPE/80:20 composites with 1 wt% CNT and 2 wt% SEBS compared to the uncompatibilized blend nanocomposite. The mechanical strength of the compatibilized blend nanocomposites was found to be higher than the unfilled compatibilized blend (i.e., without CNT), uncompatibilized blend nanocomposites, and the pristine blend, illustrating the synergistic effect of adding nanofillers and a compatibilizer. SEM and TEM microstructures were used to interpret the structure–property relationships of these polymer blend nanocomposites.

Conductivity of carbon nanotube-filled polymer blends: a review

Nano-engineering Thermal Transport Performance of Carbon Nanotube Networks with Polymer Intercalation: a Molecular Dynamics Study.

Electrical Properties Of Single-Wall Carbon Nanotube-Polymer Composite Films

Effect of the selective localization of carbon nanotubes and phase domain in immiscible blends on tunable microwave dielectric properties

Single-walled Carbon Nanotube–polymer Composites: Electrical, Optical and Structural Investigation

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

Dielectric Properties and Conductivity of Carbon Nanofiber/semi-Crystalline Polymer Composites

Progress of Electrical Property in Polymer/Carbon Nanotube Composites

Using In-Situ Polymerization of Conductive Polymers to Enhance the Electrical Properties of Solution-Processed Carbon Nanotube Films and Fibers

Electrical conductivity of carbon nanotube-filled miscible poly(phenylene oxide)/polystyrene blends prepared by melt compounding

Nanocarbon‐based Hybrid Fillers in Thermally Conductive Polymer Composites: A Review

Aligned Carbon Nanotube/polymer Composite Fibers with Improved Mechanical Strength and Electrical Conductivity

Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties

Carbon Nanotube Filled Polymer-Based Dielectric Composites With High Dielectric Constant

Thermal Conductivity of Polymers and Their Nanocomposites

Advances in Carbon Black Filled Conductive Polymer Composites

Electrical and Thermal Properties of Carbon Nanotube Polymer Composites with Various Aspect Ratios

Carbon Nanotube Migration in a Compatibilized Blend System, Leading to Kinetically Induced Enhancement in Electrical Conductivity and Mechanical Properties

Synthesis and Electrical Properties of Carbon Nanotube Polyaniline Composites

A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites

High Permittivity Polymer Composites on the Basis of Long Single-Walled Carbon Nanotubes: The Role of the Nanotube Length