Abstract:A solution anode glow discharge ( SAGD ) was established as a miniaturized excitation source of atomic emission spectrometry ( AES ) for the detection of Cd in rhizosphere soil, carrot, and carrot leaf samples. The working conditions, such as electrolyte pH, discharge voltage, support electrolyte, solution flow rate, and discharge distance, were systematically optimized. The effect of 31 foreign ions on the Cd determination was investigated. In addition, the influences of matrix modifiers on the Cd signal intensity and interference elimination were examined in detail. The results showed that under the optimal operating parameters, the presence of Fe 3+ , Co 2+ , Pb 2+ , Cu 2+ , Cr 3+ , and Tl 3+ ions at 30 mg/L causes severe depression effects for the detection of Cd, and adding ascorbic acid as a matrix modifier can reduce the matrix interference, improve sensitivity, and lower the limit of detection ( LOD ). The LOD of Cd is 4.4 μg/L, and power is below 8 W using SAGD without any matrix modifier. Compared with the solution cathode glow discharge–atomic emission spectrometry ( SCGD-AES ), the sensitivity is improved about 11-fold, and the power is consumed only about one-sixth. The analysis results of SAGD-AES are in agreement with the Cd-certified reference material and verification values measured by inductively coupled plasma atomic emission spectroscopy, suggesting that proposed method has high accuracy and reliability.

Uncertainty Evaluation for Determination of Cadmium in Dioscoreae by GFAAS

Evaluation of Uncertainty in Determination of Cadmium in Meat Products by GFAAS

Uncertainty evaluation of determination of emamectin benzoate residues in the water bamboo by high performance liquid chromatography-tandem mass spectrometry

Uncertainty Evaluation for the Results from the Preparation of Cadmium Standard Solution

Evaluation of Uncertainty of Measurement of Copper in Soil by FAAS

Determination of Cadmium in Protein Powder by Microwave Digestion-GFAAS

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

Determination of Cadmium in Fermented Sausage by Graphite Furnace Atomic Absorption Spectrophotometry

Evaluation of Measurement Uncertainty for Determination of Agarotetrol in Aquilariae Lignum Resinatum

Uncertainty Evaluation for Determination of Major Elements in Rock by ICP-AES

GFAAS Determination of Trace Amount Cadmium in Chitosan

Uncertainty Evaluation for Determination of Trace Elements in Rock by Inductively Coupled Plasma Atomic Emission Spectrometry

Study on the Evaluating Method and the Affecting Factors of Measurement Uncertainty for the Determination of Marker Compounds in Chinese Materia Medica

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Development of an analytical method for determination of lead and cadmium in biological materials by GFAAS using Escherichia coli as model substance.

Rapid, Simultaneous, and Automatic Determination of Lead and Cadmium in Cereals with a New High Performance Composite Hollow Cathode Lamp Coupled to Graphite Furnace Atomic Absorption Spectrometry

Combining accuracy and precision of traceable standards to estimate uncertainties in trace element content measurements

FAAS Determination of Trace Amounts of Lead and Cadmium in Feed Additive with Solvent Extraction

Highly Sensitive Determination of Cadmium by Atomic Emission Spectrometry with Miniaturized Solution Anode Glow Discharge

Simultaneous Determination of Trace Cadmium and Arsenic in Grains Using Atomic Absorption Spectrophotometry