Abstract:Background: The uncertainty including accuracy and precision is the most vital factor that determines the overall quality of quantitative analysis. The uncertainty has been, however, evaluated relatively within the same analytical technique. Given this background, the present study evaluates the uncertainty on quantitative elemental analysis with a quasi-absolute approach. The objectives of this study are (1) to investigate the analytical uncertainty of prompt gamma-ray analysis (PGA), a chemical interference-free method in principle, on the quantitative analysis of boron and (2) to evaluate the applicability of inductively coupled plasma optical emission spectrometry (ICP-OES), a common technique for quantitative elemental analysis including boron. Results: PGA provided analytical quantity that is equivalent to the true quantity. The quantity values determined for a series of boron-containing samples are all well above the detection limit of the PGA system, the quantity resolution of which is also much smaller than the minimum difference in quantity among the samples. These facts confirm that the evaluation of analytical uncertainty with the present PGA system is statistically meaningful. The analytical uncertainty in both methods was adequately evaluated by comparing the results from PGA and ICP-OES for a series of boron-containing materials with different physical/chemical properties (i.e. CrB2, B4C, and solidified products of stainless steel-B4C melt) and the major sources of uncertainty in both methods are specified. The conditions for sample preparation/pretreatment were optimized to lower the uncertainty. Significance and novelty: This study proposes a new concept to perform the quasi-absolute evaluation of analytical uncertainty by employing a chemical interference-free technique. The proposed concept is not limited to the combination of PGA and ICP-OES as demonstrated in this study, but it is applicable to any combination of any analytical methods for any element. Hence, the concept demonstrated in this study could be beneficial to a wide range of analytical chemistry.

Uncertainty Evaluation for Determination of Major Elements in Rock by ICP-AES

Uncertainty Evaluation for Determination of Trace Elements in Rock by Inductively Coupled Plasma Atomic Emission Spectrometry

Uncertainty evaluation of determination of emamectin benzoate residues in the water bamboo by high performance liquid chromatography-tandem mass spectrometry

Uncertainty Evaluation in Determination of Boron and Lead in Plastic by ICP-AES

Determination of microelements in lichen and egg powder by ICP-MS and analysis of the uncertainty

A Reliable Calibration Method for Accurate Determination of Major and Trace Elements in Fluorapatite by LA-ICP-MS Without an Internal Standard

Simultaneous Determination of Multi -Element in Geochemical Exploration Samples by X -Ray Fluorescence Spectrometry

Uncertainty of the Results of Electron Probe Microanalysis using a Spectrometer with Wavelength Dispersion in the Study of Geological Samples

Simultaneous Determination of 50 Elements in Geological Samples by ICP-MS Combined with ICP-OES

Inductively Coupled Plasma (icp) Mass Spectrometry (ms) Hyphenated with Atomic Emission Spectrometry(Aes) for Simultaneous Determination of Major, Minor and Micro Amounts of Elements in Geochemical Samples

Matrix effect correction method based on the main spectral parameters for rock samples in an in situ energy dispersive X-ray fluorescence analysis

A Modified Standard Addition Method and Its Application in ICP Emission Spectrometry

Combining accuracy and precision of traceable standards to estimate uncertainties in trace element content measurements

Evaluation of analytical uncertainty in quantitative determination of elements - The case of boron

A case study for measurement uncertainty of heavy metal analysis in drinking water with inductively coupled plasma-mass spectrometry (ICP-MS)

Evaluation of Uncertainty of Measurement of Copper in Soil by FAAS

Estimation of the Multielement Content in Rocks Based on a Combination of Visible–Near-Infrared Reflectance Spectroscopy and Band Index Analysis

Quantifying Common Major and Minor Elements in Minerals/rocks by Economical Desktop Scanning Electron Microscopy/silicon Drift Detector Energy-Dispersive Spectrometer (SEM/SDD-EDS)

Quantifying Heterogeneity of Small Test Portion Masses of Geological Reference Materials by Portable XRF Spectrometry: Implications for Uncertainty of Reference Values

ICP-AES Determination of 5 Chemical Components in Chromium Ores

Uncertainty Evaluation of an In-Flight Absolute Radiometric Calibration Using a Statistical Monte Carlo Method