Abstract:Flame-retardant polypropylene (PP) samples were in situ compatibilized with maleic anhydride grafted PP. Compatibilization reaction was verified by an IR spectrum and gel content measurements. Electron microscopy images showed that compatibilization could considerably reduce the size of the flame-retardant domains, control the phase morphology, and improve the interfacial adhesion between PP and intumescent flame retardant (IFR) with different IFR loading levels. The limiting oxygen index (LOI) of flame-retardant PP increased to different extents after compatibilization, indicating an improvement in the flame retardancy. Compatibilization enhanced the thermal stability to some extent and remarkably delayed thermal oxidative degradation of flame-retardant PP. For PP containing 20 wt % flame retardant, the temperature at which the maximum weight loss rate occurred was enhanced by about 99 degrees C after compatibilization. The storage modulus and glass transition temperatures were elevated to different extents. Tensile strengths of samples reduced in the presence of flame retardant alone but in the additional presence of compatibilizer were restored to levels similar to those of pure PP. Elongation-at-break values, however, showed IFR concentration-dependent reductions that were less for compatibilized samples. Furthermore, the complex viscosity of a compatibilized PP melt turned slightly smaller, which is favorable to melt processing.

Study on Dynamic Rheological Properties of Flame Retardant PC/ABS Composites System

Dynamic Mechanical Analysis of Flame Retardant PC/ABS Composites

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Study on Dynamic Rheological Properties of PC/PA6 Blend

DYNAMIC RHEOLOGICAL PROPERTIES OF PC/PET BLENDS

Dynamic Rheological Properties of Flame-retardant HIPS

Dynamic Mechanical Analysis of High Gloss PC/PMMA Composites

Rheological, flame retardancy, and thermomechanical properties of polymethyl methacrylate composites: Effects of flame retardant and toughener

Thermal Clegeadation Kinetics of Flame Retarded PC/ABS

Effect of Flame Retardant Containing Phosphorus and Silicone on Thermal Performance of PC/ABS

Study of Dynamic Failure Behavior of a Type of PC/ABS Composite

Flame Retardancy Research of Modified Mesoporous Silica in PC/ABS

Synthesis of multipolyphosphazene ramification and research on its influence on PC/ABS performance

Effects of Surface Modifiers on Mechanical and Rheological Properties of Halogen-Free Flame Retarded Polyethylene Composites

A Study of the Dynamic Flammability of Radiation Cross-Linked Flame-Retardant HDPE/EPDM/silicon-elastomer Compound

Experimental Investigation of the Viscoelastic Deformation of PC, ABS and PC/ABS Alloys

Compounding Flame Retardancy of Triphenyl Phosphate and Alpha Zirconium Phosphate for Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends

Investigation of Viscoelastic Deformation and Constitutive Modeling of PC, ABS and PC/ABS Alloys

Study on Flame-retardant PC/ABS Alloy with High-Strength and Heat-resistance

Effect of Epoxy Modifier on Flame Retardancy and Rheological Behaviour of ABS/Montmorillonite Composites