Abstract:Research over the years has shown that the formation of the Fe$_3$Si phase in FINEMET (Fe-Si-Nb-B-Cu) alloys leads to superior soft magnetic properties. In this work, we use a CALPHAD approach to derive Fe-Si phase diagrams to identify the composition-temperature domain where the Fe$_3$Si phase can be stabilized. Thereafter, we have developed a precipitation model capable of simulating the nucleation and growth of Fe$_3$Si nanocrystals via Langer-Schwartz theory. For optimum magnetic properties, prior work suggests that it is desirable to precipitate Fe$_3$Si nanocrystals with 10-15 nm diameter and with the crystalline volume fraction of about 70 \%. Based on our parameterized model, we simulated the nucleation and growth of Fe$_3$Si nanocrystals by isothermal annealing of Fe$_{72.89}$Si$_{16.21}$B$_{6.90}$Nb$_{3}$Cu$_{1}$ (composition in atomic \%). In numerical experiments, the alloys were annealed at a series of temperatures from 490 to 550 \degree C for two hours to study the effect of holding time on mean radius, volume fraction, size distribution, nucleation rate, number density, and driving force for the growth of Fe$_3$Si nanocrystals. With increasing annealing temperature, the mean radius of Fe$_3$Si nanocrystals increases, while the volume fraction decreases. We have also studied the effect of composition variations on the nucleation and growth of Fe$_3$Si nanocrystals. As Fe content decreases, it is possible to achieve the desired mean radius and volume fraction within one hour holding time. The CALPHAD approach presented here can provide efficient exploration of the nanocrystalline morphology for most FINEMET systems, for cases in which the optimization of one or more material properties or process variables are desired.

Selective fabrication of metastable greigite (Fe3S4) nanocrystallites and its magnetic properties through a simple solution-based route

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

A study of sputtering process for nanocrystalline FeAlN soft magnetic thin films

Magnetic‐Field‐Induced Phase‐Selective Synthesis of Ferrosulfide Microrods by a Hydrothermal Process: Microstructure Control and Magnetic Properties

Fabrication and characterization of FePt magnetic nanofibers via electrospinning technique

One-Step Synthesis of Fe3S4 Micro-Crystals and its Facile Transformation to Fe7S8 Micro-Crystals

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

One-Step Synthesis of Fe<sub>3</sub>S<sub>4</sub> Micro-Crystals and Its Facile Transformation to Fe<sub>7</sub>S<sub>8</sub> Micro-Crystals

Selective Synthesis and Characterization of Famatinite Nanofibers and Tetrahedrite Nanoflakes

Synthesis and Magnetic Properties of Single-Crystalline Magnetite Nanowires

A Simple Solution Route to Control Synthesis of Fe3O4 Nanomaterials at Low Temperature and Their Magnetic Properties

A new simple hydrothermal preparation of nanocrystalline magnetite Fe3O4

Fundamental Magnetic Parameters from Pure Synthetic Greigite (Fe3s4)

ZnFe2O4 Nanocrystals: Synthesis and Magnetic Properties

Solventothermal synthesis and morphological control of nanocrystalline FeS2

Chemical Synthesis and Magnetic Study of Nanocrystalline Thin Films of Cobalt Spinel Ferrites

Composition‐Controllable Syntheses and Property Modulations from 2D Ferromagnetic Fe5Se8 to Metallic Fe3Se4 Nanosheets

The Structure-Tunable Synthesis and Magnetic Properties of Fe3o4 Nanocrystals

Controlled synthesis and excellent magnetism of ferrimagnetic NiFe2Se4 nanostructures

Magnetic and Magnetotransport Properties of Fe2p Nanocrystallites Via A Solvothermal Route

Metastable Phase Diagram and Precipitation Kinetics of Magnetic Nanocrystals in FINEMET Alloys