Ultimate Strength Analysis of a Jumper in Subsea Production Facility

马增骥,唐文勇,薛鸿祥

DOI: https://doi.org/10.16483/j.issn.1005-9865.2013.01.006

2013-01-01

Abstract:Jumper is one of the most important components of subsea production system,and its two ends are easily subject to primary displacement loading caused by variable underwater topography,thus will have negative effects on the structural safety of subsea production system.Analysis of the ultimate bearing capacity of jumper structure with end relative displacement and study of the characteristics of failure modes of jumpers are made,which indicate that the component of axial compressed displacement is the major factor that causes ultimate failure to jumper structure.Considering the influence of circumferential crack in inner surface on the ultimate strength of jumper,the analysis result indicates: when crack is small,because of the ovalling of pipe section and plastic yielding,axial compressed displacement will make the jumper structure be processed to the state of plastic instability easily.When crack is large,because of the high stress effect of the crack ligament area,the jumper structure will progress into ultimate condition before the state of plastic instability.The final failure mode depends on the location,length and depth of crack.This work provides useful information to design and safety assessment of jumper structure.