Abstract:The effect of partial substitution of Co for Ni on the structure and electrochemical properties of the thus formed La2Mg(Ni1−xCox)9 (x = 0.1–0.5) quaternary alloys was investigated. All alloys are consisted of a main phase with hexagonal PuNi3-type structure and a few impurity phases (mainly La2Ni7 and LaNi). The increase of Co content in the alloys leads to an increase in both the cell volume and the hydride stability, and leads to a noticeable decrease in cell volume expansion rate (ΔV/V) on hydriding. The discharge capacity of the alloys at 50mA/g increases slightly with the increase of Co content and passes though a maximum of 404.5mAh/g at x = 0.2. As the Co content increases, the high-rate dischargeability of the alloy electrodes at 800mA/g (HRD800) decreases sharply from 72.8 (x = 0) to 24.5% (x = 0.5), yet the decrease of HRD800 of the alloy electrodes with lower Co substitution (with x ≤ 0.2) is much milder. The slower decrease of HRD800 (from 72.8 to 64.2%) of the alloys with x from 0 to 0.2 is mainly attributed to the decrease of eletrocatalytic activity for charge-transfer reaction, the more rapid decrease of the alloys with x > 0.2 is mainly attributed to the lowering of the hydrogen diffusion rate in the bulk of alloy. The cycling capacity retention rate (S100) of the alloys increase greatly with increasing of Co content, increasing from 60.2% for the alloy with x = 0 to a much higher value of 87.9% for the alloy with x = 0.5. The improvement in cycling stability is attributed to the lower cell volume expansion on hydriding.

Phase structures and electrochemical performance of V2.1TiNi0.5Hf0.05Cox (x=0 –0.192) hydrogen storage alloys

Structural and Electrochemical Characteristics of V2.1TiNi0.5Hf0.05M0.152 (M = Co, Cr) Hydrogen Storage Electrode Alloys

Phase structures and electrochemical behaviors of V2.1TiNi 0.5Hf0.05Crx (x=0-0.152) hydrogen storage alloys

Phase structures and electrochemical properties of V3TiNi0.56Hf0.24Cox alloys

The phase structures and electrochemical properties of TiV2.1Nix(x=0.2 similar to 0.6) hydrogen storage alloys

The effect of Hf content on the phase structures and electrochemical properties of V2.1TiNi0.5Hfx (x=0–0.25) hydrogen storage alloys

Phase Structures and Electrochemical Properties of V2.1TiNi0.4Zrx (x=0−0.06) Hydrogen Storage Electrode Alloys

Influence of Cr or Co Doping on Electrode Properties of V 2.1 TiNi 0.5 Hf 0.05 Hydrogen Storage Alloy

Microstructure and Electrochemical Properties of V2.1TiNi0.4Zr0.06Cux (X=0-0.12) Hydrogen Storage Alloys

Phase structures of RENi4.3-xCoxMn0.4Al0.3 (x=0.5 similar to 1.3)hydrogen storage alloys and their electrochemical performance at high temperature

Phase Structures And Hydrogen Storage Capabilities Of The Alloys (Ml)(X) (Ni3.8co0.75mn0.4ti0.05)

The Effect of Ni Content on the Phase Structures and Electrochemical Properties of V2.1TiNix (x=0.1–0.9) Hydrogen Storage Alloys

An Improvement on Cycling Stability of Ti–V–Fe-based Hydrogen Storage Alloys with Co Substitution for Ni

Microstructure and Electrochemical Properties of V_(2.1)TiNi_(0.4)Zr_(0.06)Cu_(0.03)M_(0.10)(M=Cr, Co, Fe, Nb, Ta) Hydrogen Storage Alloys

Phase Structures and Electrochemical Properties of the Co-Free Hydrogen Storage Alloys La(Ni, Sn)(X)(X=5.0 Similar to 5.4)

V 2.1 TiNi 0.4 Zr 0.06 Cu 0.03 M 0.10 (M=Cr, Co, Fe, Nb, Ta)储氢合金的微结构及电化学性能

Effect of Co Substitution for Ni on the Structural and Electrochemical Properties of La2Mg(Ni1−xCox)9 (x = 0.1–0.5) Hydrogen Storage Electrode Alloys

Phase Structures and Hydrogen Storage Properties of TiV1.35Cr1.35-xMnx Alloys(x=0～0.45)

Microstructural Evolution and Performance of Hydrogen Storage and Electrochemistry of Co-added La0.75Mg0.25Ni3.5−xCox (x = 0, 0.2, 0.5 At%) Alloys

Microstructures and hydrogen storage characteristics of (Ti0.1V0.9)(100-x)Fe-x (x=0 similar to 6) alloys

The structural and electrochemical properties of La2Mg(Ni0.8-xCo0.2Alx)9 (x = 0-0.03) hydrogen storage electrode alloys