Abstract:Additional strain increments occur in concrete subject to stress constraints during cold shrinkage, resulting in irregular deformation and reducing the concrete structure’s stability. When an annular concrete structure is subjected to radial pressure, two tensile stress concentration zones will appear at the intersection of the inner wall and the diameter along the pressure direction. When exposed to low temperatures, the total strain in the tensile stress concentration zones is caused by the combined effect of applied stress strain and thermal strain. Then, the thermal strain of the structure can be obtained from the difference between the total strain and the applied stress strain. Gradient cooling was performed after applying radial pressure to the annular concrete using a counterforce device. The applied stress strain and total strain of the tensile stress concentration zones are measured by fiber Bragg grating (FBG) strain sensors fixed along the stress direction. According to the measurement results, the thermal strains of the concrete structure under the stress constraint are extracted to analyze the influence of the tensile stress constraint on the thermal strain of the concrete structure. In the temperature range of −40∘C∼20∘C, the thermal strains of the structure under radial pressures of 1500 N, 2000 N, and 3000 N are extracted, respectively. The thermal expansion coefficients are calculated based on the thermal strain of the structure. The free thermal expansion coefficient of concrete structures fluctuates around 11×10−6/∘C. When the temperature is reduced to 10∘C, the difference between the thermal expansion coefficient under the stress constraint and the free thermal expansion coefficient is the largest. When the temperature is reduced to −20∘C, the thermal expansion coefficients under each stress condition are close to the same. The results show that the stress confinement significantly inhibits the cold shrinkage of the concrete structure, and the inhibitory effect is gradually weakened when the temperature decreases.

Fundamental research on remote sensing the strain and catastrophe of concrete under uniaxial compression.

A Gaussian Processes-Based Approach for Damage Detection of Concrete Structure Using Temperature-Induced Strain

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

Research on the Characteristics of Infrared Radiation and Energy Evolution Law of Red Sandstone with Different Porosity during Uniaxial Compression

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Combining Thermal Loading System with Acoustic Emission Technology to Acquire the Complete Stress-Deformation Response of Plain Concrete in Direct Tension

Applications of the digital photogrammetry in the studies on shear behavior of concrete beams

Application of Optical-Fiber Sensing to Concrete Support and Continuous Wall Strain Monitoring

In-situ X-ray Computed Tomography Characterisation of 3D Fracture Evolution and Image-Based Numerical Homogenisation of Concrete

Experimental Analysis on Real-time Distributed Strain Measurement in Concrete

Dynamic Infrared Monitoring to Fracturing Process of CFRC

Research on the Structure Stress Analysis Based on IR Lock-in Thermography

New insights into strain evolution of concrete under different freeze-thaw conditions: Investigation based on real-time and full-field monitoring

Fundamental research on non-destructive testing of reinforced concrete structures using sub-terahertz reflected waves

Comparative Study on the Variation Features of Infrared and Microwave Radiation in Deformation and Fracture Process of Rock

Experimental Study on Precursor Characteristics of Rock Failure Based on Strain and Temperature Changes

Thermal Strain Detection for Concrete Structure Cold Shrinkage under Stress Constraint with FBG

Cooling-excited infrared thermography for enhancing the detection of concrete filled steel tube interfacial debonding at concrete hydration

Encapsulation and Protection Techniques of Optical Fiber Strain Sensors Used in Concrete Structures

Circumferential strain measurement of high strength concrete in triaxial compression by fiber optic sensor

Online SEM investigation of microcrack characteristics of concretes at various temperatures