Abstract:Al-Li alloy possesses remarkable advantages such as low density, high specific strength and specific elastic modulus, making it an exceptional aerospace structural material with considerable application potential. However, Al-Li alloy suffers from poor formability, which restricts its broader engineering applications. Alternatively, superplastic forming at high temperatures is widely applied for producing such components. Temperature is a key factor affecting the thermal deformation properties of Al-Li alloy. In this study, tensile tests of 2198 Al-Cu-Li alloy were conducted at different temperatures, and dedicated characterizations were performed to reveal the underlying mechanisms responsible for the hot deformation behavior. Results reveal that three distinct stages are observed in the superplastic deformation process of this alloy. Specifically, in the initial lowtemperature range (400 degrees C-450 degrees C), incomplete dynamic recrystallization (DRX), accompanied by grain rotation and elongation plays a dominant role in the hot deformation mechanism. In the middle temperature stage (450 degrees C-500 degrees C), both DRX and grain boundary sliding (GBS) occur. At the high-temperature stage (500 degrees C-550 degrees C), diffusion creep emerges as the prominent mechanism. Moreover, optimum superplasticity is achieved at 500 degrees C, which results from a synergistic combination of several factors, including grain refinement by DRX, an increased fraction of high-angle grain boundaries (HAGBs), reduced dislocation density and weak texture.

The Development of High Strain Rate and Low Temperature Superplasticity in Aluminum Matrix Composites

High-strain-rate superplasticity of metal matrix composites

High Strain Rate Superplasticity of in situ Al 3 Zr/6063Al Composites

The Progress in Research of the Plasticity and Superplasticity of Aluminum and Titanium Matrix Composites

Low-Temperature Superplasticity of Ultrafine-Grained Aluminum Alloys: Recent Discoveries and Innovative Potential

High Strain Rate Superplasticity of MMCs

Recent Development of Superplasticity in Aluminum Alloys: A Review

High strain rate superplasticity of SiC whisker reinforced pure aluminum composites

Achieving high strain rate superplasticity in an Al-Cu-Li alloy processed by thermo-mechanical processing

Effect of Temperature on Superplastic Deformation Behavior of 2198 Al–Cu–Li Alloy

Microstructure and high strain rate superplasticity of in situ composite synthesised from aluminium and nanoZrO2 particles by powder metallurgy

Status of superplastic materials and research and development of new superplastic low to medium carbon alloy steel

Research progress on low-temperature properties of common structural materials

Superplastic behavior at high strain rate of warm-rolled 2618A commercial aluminum alloy

In-situ surface study on the mechanism of high-strain-rate superplasticity in an Al–Cu–Li alloy

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Recent development in the mechanics of superplasticity and its applications

High Strain Rate Superplasticity in Al-Zn-Mg-Based Alloy: Microstructural Design, Deformation Behavior, and Modeling

Research Progress of Aluminum Alloy Welding/Plastic Deformation Composite Forming Technology in Achieving High-Strength Joints

Hot Deformation Behavior and Microstructure Evolution of High-Strength Al-Zn-Mg-Cu Alloy

Microstructure and high strain rate superplasticity of <I>in situ</I> composite synthesised from aluminium and nanoZrO<SUB>2</SUB> particles by powder metallurgy