Abstract:In this paper, by constructing a 3-DOF (Degrees of freedom) laser interferometer on each displacement axis of motion, the main errors during the coordinate measuring machines (CMM) motion are dynamically monitored. The 3-DOF laser interferometer is composed of three-beam dual-frequency laser interferometers, and each dual-frequency laser interferometer obtains the reflection signal through a corner cube reflector. By determining the position parameters of the three corner cube reflectors and three sets of feedback signals, the 3-DOF laser interferometer can calculate the three parameters, i.e., the axial displacement and the lateral pitch and yaw angles. The device is installed on each motion axis of the CMM to monitor 9 major errors during the whole motion system. Laser signals are used to track position information by establishing the rigid body transformation relationship. Therefore, the 9 errors can be updated in real time through the monitoring system to replace the calibration results to calculate the probe position. The position error of the CMM probe caused by the dynamic error is simulated. Monte Carlo method is employed to obtain the error situation and monitor the residual error distribution throughout the measurement movement process. The errors can be corrected immediately without recalibrating the CMM error parameters especially when the dynamic error changes significantly. In addition, environmental errors are also introduced in the model to analyze the impact on the accuracy of position monitoring. The method proposed can reduce the position monitoring error within 0.1 mu m. Using this method, the error source of a dynamic error monitoring system can be designed in a simulated environment, which can be used as the basis for the design of the dynamic error monitoring system.

Positional Correction Algorithm of a Laser Galvanometric Scanning System Used in Rapid Prototyping Manufacturing

Error Correction Of Laser Scanning System For Reverse Engineering

Positioning accuracy improvement method of industrial robot based on laser tracking measurement

Graded Error Compensation Method for Heavy-Load Manipulators Based on Laser Tracking Measurement

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Pose Accuracy Compensation Technology in Robot-aided Aircraft Assembly Drilling Process

Positioning Error Compensation on Two-Dimensional Manifold for Robotic Machining

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Scanning system development and digital beam control method for electron beam selective melting

Research on the Position Error Compensation of Linear Motor

Volumetric error identification for CNC machine tool based on multi-body system and vector diagonal measurement

Modeling, Identification and Compensation for Geometric Errors of Laser Annealing Table

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Geometric error compensation method using the Laser R-test

Field distortion correction in galvanometric scanning system by interpolation with symmetric polynomials

Position geometric error modeling, identification and compensation for large 5-axis machining center prototype

Geometric error identification algorithm of numerical control machine tool using a laser tracker

A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

System Errors Calibration for GLS-1500 Scanner

Calibration Error of Robotic Vision System of 3D Laser Scanner

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer