Abstract:In this paper, LiNO3 (lithium nitrate)‐[BMIM]NO3 (1‐butyl‐3‐methylimidazolium nitrate)/H2O is presented for absorption‐compression hybrid refrigeration. The thermophysical properties and corrosion of this ternary system were measured. The performance of this hybrid system using LiNO3‐[BMIM]NO3/H2O was studied and compared with those based on LiBr (lithium bromide)/H2O, LiNO3/H2O, and LiNO3‐[MMIM][DMP] (1,3‐dimethylimidazolium dimethylphosphate)/H2O. Results showed that the hybrid refrigeration cycles can work at much lower generator and evaporator temperatures in comparison with the pure absorption cycle. Generator temperatures of both hybrid cycles based on this working fluid were lower than those using the other working fluids. At different refrigeration temperatures, the generator temperatures of both hybrid cycles using this presented working fluid were reduced about 7 and 10 K, respectively, in comparison with those based on LiBr/H2O. Compared with other working fluids, both single‐ and double‐effect hybrid systems using this new working fluid achieved a larger coefficient of performance around 0.88 and 1.6, respectively. Additionally, the exergetic efficiency for both hybrid cycles is also about 10% larger than that using LiBr/H2O. And this working fluid shows an excellent thermal stability below 598.32 K and acceptable high‐temperature anti‐corrosion to metallic materials. Moreover, the hybrid cycle using LiNO3‐[BMIM]NO3/H2O of 80 kW has a shorter payback period of 5.51 years when utilizing solar energy as the driven heat source. Therefore, LiNO3‐[BMIM]NO3/H2O shows great advantages in the absorption‐compression hybrid cycles.

Performance of Absorption-type heat pump with mixture solution of lithium bromide and lithium nitrate

Heat Capacities of Four Promising Alternatives to Lithium Bromide Aqueous Solution in Absorption Refrigerators

The Contrast Between the Water-Lithium Bromide-Lithium Nitrate and the Water-Lithium Bromide Absorption Refrigeration Cycle

STUDY ON LITHULM-BROMIDE AQUEOUS SOLIYTION AIR-PRECOOLED ADIABATIC ABSORPTION PROCESS

Performance Calculation of Single Effect Absorption Heat Pump Using LiBr + LiNO3 + H2O As Working Fluid

APPLICATION OF REFRIGERATING MACHINE BASED ON LITHIUM BROMIDE IN CIRCULATING SYSTEM OF HAT

Study on enhancement mechanism of additive in absorption heat pump

Absorption heat pump performance for different types of solutions

Thermodynamic performance of absorption‐compression hybrid refrigeration cycles based on lithium nitrate+1‐butyl‐3‐methylimidazolium nitrate/water working fluid

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

A novel internally hybrid absorption-compression heat pump for performance improvement

Experimental assessment of a detachable plate falling film heat and mass exchanger couple using lithium bromide and water as working fluids

Performance Investigation on an Air Source Heat Pump System with Latent Heat Thermal Energy Storage

A Novel H2O/LiBr Absorption Heat Pump with Condensation Heat Recovery for Combined Heating and Cooling Production: Energy Analysis for Different Applications

Experimental Study of Large Temperature Lift Heat Pump (LTLHP) in CHP System

Experimental Study on New Variable Composition Heat Pump System

A mathematical model with experiments of single effect absorption heat pump using LiBr–H2O

Dynamic Modeling and Operation Characteristics Analysis of LiBr Absorption Heat Pump

A Novel Absorption Refrigeration Cycle for Heat Sources with Large Temperature Change

Research progress of absorption characteristics enhancement of LiBr/NH_3-H_2O with additives and nano-particles

Absorption capability of non-pumped LiBr absorption chiller