Abstract:We studied crystallization behaviors of amorphous C-Sb films to evaluate their applicability in phase-change memory. C-Sb thin-films with 92 to 50 at% Sb were deposited by co-sputtering from elemental targets. In-situ electrical resistance-temperature measurement, differential thermal analysis, and grazing-incident X-ray diffraction were applied in this work. Kinetics of crystallization was explored using Kissinger's non-isothermal method and Arrhenius' isothermal method, respectively. As-deposited C-Sb films are amorphous whose electrical resistance decreases as increasing temperature with a 4 to 3 orders-of-magnitude drop at the crystallization temperature. The crystallization temperature increases from 263 to 275 degrees C as Sb content decreases from 90 to 83 at%. The melting temperature remains almost unchanged, 624 degrees C, denoting the melting of Sb. The activation energy of crystallization increases from 3.37 eV (90 at% Sb) to 3.88 eV (83% Sb). Structure of C-Sb films after full crystallization belongs to R (3m) over bar Sb phase. The temperature corresponding to 10-year data-retention of 87 at% Sb films is 168. Electrical switching characterized using a memory-device made of 87 at% Sb film works smoothly at voltages with 50 ns pulse-width, set at 1.1 V and reset at 2.8 V. Binary C-Sb materials, being compatible with CMOS processing, are predicted to be promising candidates for use as phase-change memory.

Antimony alloys for phase-change memory with high thermal stability

Materials For Phase-Change Memory With Elevated Temperature Stability

The Use of Ga16Sb84 Alloy for Electronic Phase-Change Memory

The Phase Change Memory Features High-Temperature Characteristic Based on Ge-Sb-Se-Te Alloys

Te-Free SiSb Phase Change Material for High Data Retention Phase Change Memory Application

Characteristics of TeGa$_{2}$Sb$_{14}$ Thin Films for Phase-Change Memory

Ab initio molecular dynamics and materials design for embedded phase-change memory

Thermal Properties And Structure Of Tega2sb7 Thin Films For Phase-Change Memory

Designing Sb phase change materials by alloying with Ga 2 S 3 towards high thermal stability and low resistance drift by bond reconfigurations

Characterizations of electronic and optical properties of Sb-based phase-change material stabilized by alloying Cr

Temperature Dependence of Thermal Properties of Ag 8 in 14 Sb 55 Te 23 Phase-Change Memory Materials

Crystallization Kinetics of Amorphous Ga-Sb Films Extended for Phase-Change Memory

Study of Er-Sb and Er-Te parental alloys used in phase change memory

Atomic Scale Insight into the Effects of Aluminum Doped Sb2Te for Phase Change Memory Application

Crystallization kinetics of monatomic antimony

Electrical Characteristics of Ga3Te2Sb12 with High Thermal Stability for Pram

Ga2te3 Phase Change Material For Low-Power Phase Change Memory Application

Development of Sb phase change thin films with high thermal stability and low resistance drift by alloying with Se

Change in Structure of Amorphous Sb–Te Phase‐Change Materials as a Function of Stoichiometry

C-Sb Materials As Candidate for Phase-Change Memory

Advantages of Ta-Doped Sb3Te1 Materials for Phase Change Memory Applications