Abstract:Background Camera calibration is a key process in optical deformation measurement techniques, like close-range photogrammetry and digital image correlation (DIC). Traditionally, an expensive calibration board with precisely machined feature points is employed in camera calibration. Low-precision calibration boards will lead to unstable camera parameters and worse length measurement accuracy (the relative measurement accuracy high than 0.1%). Objective To introduce camera calibration methods capable of achieving high measurement accuracy even with low-precision calibration boards, and give practices guide on selecting suitable calibration methods and judging calibration results. Methods Three calibration methods are introduced and discussed. In the iterative board-points method, all the feature points on the calibration board are flexible. The coordinates of all the feature points and camera parameters are iteratively updated and solved simultaneously. In the fixing 3-points method, three feature points on the calibration boards are selected and the distances between them are measured precisely; the locations of these points are fixed in the optimization process. Both the simulation experiments and the real experiments were carried out to study the performance of the three calibration methods. Results Experimental results showed that both the iterative board-points method and the fixing 3-points method can effectively improve the accuracy of calculated camera parameters. Compared with the iterative board-points method, the fixing 3-points method restores the calibration board more precisely, as well as showing improved reproducibility and higher measurement accuracy. The relative accuracy of 3D distance measurement is also increased from 0.1% to 0.01 %, even using a low-precision paper calibration board. Conclusions High measurement accuracy can be obtained using the fixing 3-points calibration method, even with a low-precision calibration board. This will decrease the cost and expand the application of optical measurement, especially in large structure deformation measurement.

Comparison of Calibration Methods for Image Center

Centra Catadioptric Camera Calibration with Single Image.

Planar Visual Metrology Using Partition-Based Camera Calibration

Intrinsic and Extrinsic Calibration of Roadside LiDAR and Camera

Calibration of Central Omnidirectional Cameras Via the Viewing Sphere

A Novel Camera Calibration Method Based on Multiple Calibration Planes

Using Subpixel Corner Detection to Improve Calibration Precision

The Comparison of Two Stereo Vision Sensor Calibration Methods

Improvement of Two-step Calibration Method in Machine Vision

A High-Quality and Convenient Camera Calibration Method Using a Single Image

Comparison of Digital Centering Algorithms Based on CCD Images

Comparison Study of Three Camera Calibration Methods Considering the Calibration Board Quality and 3D Measurement Accuracy

A binocular camera calibration method based on circle detection

A New Method for Camera Calibration Based on Concentric Circles with Cross Lines

Practical CCD camera calibration method

Comparison of 3-D Self-Calibration Methods for High-Precision Measurement Instruments

Overview of Camera Calibration Methods for Machine Vision

Improved Camera Calibration Method Using Complementary Patterns

Experimental Analysis and Improvement on Camera Calibration Pattern

Improved robust and accurate camera calibration method used for machine vision application

Iterative Camera Calibration Method Based on Concentric Circle Grids