Abstract:Background Camera calibration is a key process in optical deformation measurement techniques, like close-range photogrammetry and digital image correlation (DIC). Traditionally, an expensive calibration board with precisely machined feature points is employed in camera calibration. Low-precision calibration boards will lead to unstable camera parameters and worse length measurement accuracy (the relative measurement accuracy high than 0.1%). Objective To introduce camera calibration methods capable of achieving high measurement accuracy even with low-precision calibration boards, and give practices guide on selecting suitable calibration methods and judging calibration results. Methods Three calibration methods are introduced and discussed. In the iterative board-points method, all the feature points on the calibration board are flexible. The coordinates of all the feature points and camera parameters are iteratively updated and solved simultaneously. In the fixing 3-points method, three feature points on the calibration boards are selected and the distances between them are measured precisely; the locations of these points are fixed in the optimization process. Both the simulation experiments and the real experiments were carried out to study the performance of the three calibration methods. Results Experimental results showed that both the iterative board-points method and the fixing 3-points method can effectively improve the accuracy of calculated camera parameters. Compared with the iterative board-points method, the fixing 3-points method restores the calibration board more precisely, as well as showing improved reproducibility and higher measurement accuracy. The relative accuracy of 3D distance measurement is also increased from 0.1% to 0.01 %, even using a low-precision paper calibration board. Conclusions High measurement accuracy can be obtained using the fixing 3-points calibration method, even with a low-precision calibration board. This will decrease the cost and expand the application of optical measurement, especially in large structure deformation measurement.

Improvement of Two-step Calibration Method in Machine Vision

Camera Calibration Technique Based on Virtual 3D Object

An Optimization Based Vision Calibration Method for PTZ Camera's Errors in Model and Execution

Calibration of a Single-Point Laser Range Finder and a Camera

Camera Self-Calibration from Multi-View Images

Efficient Calibration Method for Vision Navigation Camera

A Novel Camera Calibration Method Based on Multiple Calibration Planes

Improved Camera Calibration Method Using Complementary Patterns

Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

Effective camera calibration in free-viewpoint systems

A High-Quality and Convenient Camera Calibration Method Using a Single Image

Multi-camera Calibration Based on Multi-view Registration Algorithm

A Method to Improve the Accuracy of Hand-Eye Calibration Based on Data Filtering and Parameters Optimization

Improved Calibration of Eye-in-Hand Robotic Vision System Based on Binocular Sensor

A Stable, Efficient, and High-Precision Non-Coplanar Calibration Method: Applied for Multi-Camera-Based Stereo Vision Measurements

Calibration Method for Wide-Field Machine Vision System Based on Laser Projection Turntable

A Robust and Rapid Camera Calibration Method by One Captured Image

Geometric Calibration for Cameras with Inconsistent Imaging Capabilities

Comparison Study of Three Camera Calibration Methods Considering the Calibration Board Quality and 3D Measurement Accuracy

A New Method of Calibrating the Camera Nonlinear Model

An extrinsic calibration method for binocular cameras and swing 2D laser rangefinder