Abstract:This paper presents a novel extrinsic calibration method based on four-layer laser and a camera, In the case of camera intrinsic parameters are known, we can obtain the corresponding points on a set of laser data and image feature points by using the same feature that both captured by laser and camera, which followed by acquiring the extrinsic parameters of sensor sysems according to the projective relation between the laser coordinate and pixel coordinate system. In order to make full use of advantages of four-layer laser, we designed a special calibration board, which allows us to solve unique solution by using P6P algorithm with only three different postures. The precision of solutioin depends on accuracy of feature points, which can be affected by following reasons. 1) Lack of optimization on extracted features points. Because the interval between adjacent scan points, which may not just fall on the edge of slit, is about 20mm, so deviation range of the feature points in Y axis direction of the radar coordinate is about 0~10mm. 2) The extracted feature points are approximate. Because the ideal feature point should be located in the middle of the edge of slit, of which the width is 5mm, so deviation range of the feature points in Z axis direction of the radar coordinate is about 0~3mm. The experimental results show that the average projection error is about 30pixels, while that of which in the state of the art achieve 6pixels[1], which is mainly occured by no optimal processing. The advantage of this method is simple and reliable, and the cost of the sensors is low as well, which allows it can be used in scenes such as off-road vehicle autonomous navigation.

An extrinsic calibration method for binocular cameras and swing 2D laser rangefinder

Extrinsic Calibration of a Single-Point Laser Rangefinder and Single Camera

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

Extrinsic Calibration of A 3d Lidar and A Camera Using A Trihedron

Intrinsic and Extrinsic Calibration of Roadside LiDAR and Camera

A Novel Method for the Extrinsic Calibration of a 2D Laser Rangefinder and a Camera

The Extrinsic Calibration of Area-Scan Camera and 2D Laser Rangefinder (LRF) Using Checkerboard Trihedron

EXTRINSIC CALIBRATION OF ROTATING 2D LASER RANGE FINDER AND CAMERA USING PHOTOGRAMMETRIC TEST FIELD AND PING PONG BALLS

Extrinsic Calibration between a Camera and a 2D Laser Rangefinder using a Photogrammetric Control Field

Calibration of a 3D laser rangefinder and a camera based on optimization solution

Extrinsic Parameter Calibration Method for a Visual/Inertial Integrated System with a Predefined Mechanical Interface

Extrinsic calibration and usage of a single-point laser rangefinder and single camera

Precise and Robust Binocular Camera Calibration Based on Multiple Constraints

Extrinsic Calibration of a Camera and a 2D Laser Range Finder Using Ping Pong Balls and the Corner of a Room

A Method of Extrinsic Calibration Between a Four-Layer Laser Range Finder and a Camera

An Accurate and Stable Extrinsic Calibration for A Camera and A 1D Laser Range Finder

A Novel and Simplified Extrinsic Calibration of 2D Laser Rangefinder and Depth Camera

Sensor-Aided Calibration of Relative Extrinsic Parameters for Outdoor Stereo Vision Systems

Extrinsic Parameter Calibration of Stereo Vision Sensors Using Spot Laser Projector.

Extrinsic calibration of a camera with dual 2D laser range sensors for a mobile robot

An Efficient Solution for Extrinsic Calibration of a Vision System with Simple Laser.