Abstract:The paper investigated the effect of carbonation calcination cycling conditions on the microstructure and CO2 sorption property of a sorption complex catalyst. The carbonation operation condition consisted of temperature of 600 degrees C with 20% CO2-80% N-2 and 20% CO2 -80% steam atmosphere to simulate the methane reforming reaction conditions; the calcination condition was 800 degrees C with 100% N-2, The Brunauer-Emmer-Teller (BET) surface area and thermogravimetric analysis (TGA) were measured to investigate the microstructure and variation in sorption property of the catalyst after multiple cycles under each condition. Results showed that the microstructure and CO2 sorption capacity of the sorption complex catalyst decayed significantly in the initial carbonation calcination cycles, especially under a steam atmosphere. X-ray diffraction analysis revealed that a stable compound Ca12Al14O33 formed gradually during the initial carbonation calcination cycle seven at a temperature of 800 degrees C. A model is proposed to explain the observed effect of carbonation calcination cycling on Ca12Al14O33 formation. Furthermore, based on our findings, a new sorption complex catalyst was prepared by pretreating at a high temperature of 900 degrees C. Evaluation of the catalyst prepared by the ReSER hydrogen production process through 10 circulations revealed significant improvement instability. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved,

Effect of Calcination Temperature on Characteristics and Performance of Ni/MgO Catalyst for CO2 Reforming of Toluene

The Microstructure and Stability of a Ni-nano-CaO/Al2O3 Reforming Catalyst under Carbonation–calcination Cycling Conditions

Experimental study of Ni/MgO catalyst in carbon dioxide reforming of toluene, a model compound of tar from biomass gasification

Effect of Calcination Temperature on the Performance of the Ni@SiO2 Catalyst in Methane Dry Reforming

Effect of Formation of NiO-MgO Solid Solution on Activity and Stability of Ni/MgO-AN for CO2 Reforming of Methane

Durable Ni/Mgo Catalysts For Co2 Reforming Of Methane: Activity And Metal-Support Interaction

Tuning Metal–Support Interactions on Ni/Al2O3 Catalysts to Improve Catalytic Activity and Stability for Dry Reforming of Methane

Effects of Calcination Temperature on the Catalytic Performance of Ni-Al2 O3 Catalyst

Effects of Calcination Condition on the Structure and Denitrification Performance of NiO/TiO_2 Catalyst

Performance of Ni/MgO–AN Catalyst in High Pressure CO 2 Reforming of Methane

The Influence of Reduction Temperature on the Performance of ZrOx/Ni-MnOx/SiO2 Catalyst for Low-Temperature CO2 Reforming of Methane

Effect of the Calcination Temperature of LaNiO3 on the Structural Properties and Reaction Performance of Catalysts in the Steam Reforming of Methane

Dry reforming of methane on Ni/mesoporous-Al2O3 catalysts: Effect of calcination temperature

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: I. Effect of preparation conditions and Ni loading

Influence of Supports on Catalytic Behavior of Nickel Catalysts in Carbon Dioxide Reforming of Toluene As a Model Compound of Tar from Biomass Gasification.

Tailored Ni-MgO Catalysts: Unveiling Temperature-Driven Synergy in CH4-CO2 Reforming

Effect of Calcination Conditions on Co3O4 Catalysts in the Total Oxidation of Toluene and Propane

Catalytic performance of Mn-promoted Ni/MgO catalysts in CO 2 reforming of toluene used as model compound of tar produced from biomass: Influence of preparation methods

Meso-porous Ni/Mg/Al catalysts for methane reforming with CO2

Catalytic Performance and Characterization of Ni–CaO–ZrO2 Catalysts for Dry Reforming of Methane

CO2 Reforming of Methane over Ni0/La2O3 Catalyst Without Reduction Step: Effect of Calcination Atmosphere