Abstract:With the increase in computational costs driven by the use of artificial intelligence, enhancing the performance of semiconductor systems while improving efficiency has become an inevitable challenge. Due to the fine pitch limits of micro bumps, bumpless Cu-Cu bonding is emerging as the next-generation core technology. This study aims to analyze the effects of individual temperature and pressure on both large- and local-scale behaviors of material in the Cu-Cu bonding process with experiments and numerical analysis. The motivation of this study is to compensate the deficiencies in reported studies on process optimization, particularly the lack of exploration of the separated effects of temperature and pressure on large- and local-scale Cu-Cu bonding. Furthermore, reports on the thermodynamic modeling of Cu-Cu bonding behavior are not sufficient, making it challenging to find suitable models. Bonding experiments were performed by independently controlling the temperature and pressure using blank Cu films treated by precise chemical mechanical polishing (CMP) processes. The large-scale bonded area under each condition was measured, and transmission electron microscope (TEM) images were captured to observe the patterns of local void formation under various temperature and pressure conditions. In the experiments, it was observed that the temperature increase had a greater impact on the bonded area at a larger scale than the increase in pressure. However, for nanoscale-local voids, an increase in pressure had a more dominant effect. To discuss the experimental results, a thermodynamic modeling framework that considers coupled heat-induced deformation, plastic deformation, and volumetric changes caused by material flux was proposed. The proposed model has been implemented in the user-defined material subroutine (UMAT) of the ABAQUS program for finite element (FE) analysis. Numerical analysis using the proposed model captures the experimental data well. In large-scale simulations, temperature conditions have a significant impact, with plastic deformation being the primary mode of deformation, while the pressure conditions dominate the material flux, making substantial contributions to reducing voids at local-scale. To achieve complete closure of the void, the simulation demonstrated that maintaining a sufficient pressure gradient until the complete closure is required. The study findings provide an explicit understanding of how the temperature and pressure conditions differently affect large-scale bonding and local voids for semiconductor package manufacturing.

Atomic migration of Cu-pillar bumps in thermomechanical coupling fields

Computational Analysis of Mechanical and Electromigration Reliability Problems

A new prediction methodology for electromigration-induced solder degradation in a WL-CSP system

Electromagnetic–Thermo–Mechanical Coupling Behavior of Cu/Si Layered Thin Plate under Pulsed Magnetic Field

Reliability Study of Fine Pitch Cu-Sn Micro-Bump Structure Electromigration Test by Finite Element Simulation

The Effect of Pressure and Orientation on Cu-Cu3Sn Interface Reliability under Isothermal Ageing and Monotonic Traction Via Molecular Dynamics Investigation

Creep behavior of intermetallic compounds at elevated temperatures and its effect on fatigue life evaluation of Cu pillar bumps

Interfacial reaction and failure mechanism of Cu/Ni/SnAg1.8/Cu flip chip Cu pillar bump under thermoelectric stresses

A Molecular Dynamics Investigation of the Effect of Pressure and Orientation on the Cu Consumption in Cu-Cu3Sn Interface under Isothermal Ageing and Its Dissipative Mechanisms during Traction

Experimental and Numerical Studies of Stress Migration in Cu Interconnects Embedded in Different Dielectrics

The Study of the Reliability of Complex Components during the Electromigration Process

Experimental and multiphysics simulation study of atoms migration and morphology evolution in solder joints under high current density

Electromigration-induced void evolution and failure of Cu/SiCN hybrid bonds

Effect of Bonding Strength on Electromigration Failure in Cu–Cu Bumps

Impact of Mechanical Property Degradation and Intermetallic Compound Formation on Electromigration-Oriented Failure of a Flip-Chip Solder Joint

Thermomigration-induced failure in ball grid array solder joint under high current stressing

Inhibition of roof-type Cu6Sn5 grains on migration of Cu atoms under temperature gradient

Mesomechanical modelling of SnAgCu solder joints in flip chip

Grain boundaries-dominated migration failure of copper interconnect under multiphysics field: Insight from theoretical modeling and finite element analysis

Thermodynamic modeling framework with experimental investigation of the large-scale bonded area and local void in Cu-Cu bonding interface for advanced semiconductor packaging

Microstructural evolution of joints with and without Sb, Ni in Sn58Bi solder under electro-thermal-force coupling